eude Posted November 19, 2020 Posted November 19, 2020 Hi guys, I'm planning a new pedalboard, and I need to power pedals, maybe 10 in the future, but don't want to go too crazy on the PSU. There's a nice Rockboard one, that has 8 X 9V and 2 X 18V outputs, is there anything out there that will allow me to adapt the 18V down to 9V? There's the Truetone V189, but it states "This cable is designed for use with the Truetone 1 SPOT PRO power supply" one various websites where its for sale. Anyone got any ideas? Cheers, Eude Quote
itu Posted November 19, 2020 Posted November 19, 2020 What are you about to power? If the units are not very power hungry and there are analog units, daisy chain them. You do not need to have one outlet/effect. 1 Quote
eude Posted November 19, 2020 Author Posted November 19, 2020 Ah right. The 9V outputs are all 150 mA. I hadn't considered daisy chaining... All the pedals are fairly standard offerings, couple of tiny TC Electronic ones too, perhaps I could daisy some of them. Eude Quote
paul_5 Posted November 19, 2020 Posted November 19, 2020 A simple L pad with two resistors would split that into 2 9v supplies. 1 Quote
eude Posted November 19, 2020 Author Posted November 19, 2020 I'm going very much all Rockboard here, so a single Rockboard daisy chain cable should do the trick... https://www.rockboard.de/kabel-und-verbindungen/rockboard-flat-daisy-chain-cable-2-outputs-angled-rbo-cab-power-dc2-a Thank you for your help folks! Eude Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.