johnpaulbass Posted November 27, 2020 Share Posted November 27, 2020 Hello bass friends, I did a search before I decided to write down this thread. I'm in a hunt, ONLY USED !, for a a good bass preamp that has to have the BAL input since for a future project we're working to go full in ear and this would be quite a minimalist thing (trio, mostly acoustic stuff, there will be some electric but with VEEEEEEEEEEERY low volume). I intend to build myself a pedal board with: tuner, preamp, maybe a LS2 from Boss in order to have the possibility of 2 basses. Said so I'm planning to use my Custom shop fender P bass and a semi hollow bass. So far, from what I have seen in this price range (again, in the used market) the choice goes between these: - Aguilar tone hammer (my favorite so far) - mxr m81 - electro harmonix battalion - eden wtdi ecc.. The point of this thread is to explore for some other that I may not have found. What are you experience ? I would love to read of other preamps Thank you in advance for your help. Quote Link to comment Share on other sites More sharing options...
dudewheresmybass Posted November 27, 2020 Share Posted November 27, 2020 I’ve used loads over the years - Hartke, Aguilar, Eden, sans amp among others but for a good number of years now I have used the mxr Di+ (M80) in my minimal / pa only rigs. great neutral sound (and a mid scoop available if that’s your bag 😉) it also has two channels, which can be a blended drive 1 Quote Link to comment Share on other sites More sharing options...
jrixn1 Posted November 27, 2020 Share Posted November 27, 2020 I'm using a MicroBass 3 straight to PA, which is slightly out of your stated budget... but you said you might add a tuner and an LS-2, in which case the MicroBass 3 already has those things built in. The MicroBass 3 has two physical input channels, which can be independent or blended; I put my acoustic (upright) on channel 1 as it has the full eq including semi-parametric mids and a notch filter. I put P bass on channel 2 which has semi-param mids and drive. Also, I don't know what your in-ear setup is, but the MicroBass 3 has an aux-in for the monitor feed, and independent volume control of your bass to your ears. It also has two DI outputs and an effects loop. For me as an aspiring minimalist, it replaced about four pedals and it has no extraneous functions. 2 Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted November 27, 2020 Share Posted November 27, 2020 Of those listed I only have experience of the Tonehammer, and wouldn’t hesitate to recommend it, it’s a great pedal if looking for more vintage style tones, such as valve warmth. 2 Quote Link to comment Share on other sites More sharing options...
dodge_bass Posted November 27, 2020 Share Posted November 27, 2020 7 hours ago, Lozz196 said: Of those listed I only have experience of the Tonehammer, and wouldn’t hesitate to recommend it, it’s a great pedal if looking for more vintage style tones, such as valve warmth. Agreed it’s a great pedal. I think you might want to think a little further on the type of sound you want as that will necessarily impact on the type of preamp you gravitate towards. A bit tubey / dirty or super clean or somewhere in between? Tone hammer does the tube thing well, MXR DI is very clean. Both great (I’ve had and used both) in the right setting....what sort of vibe are you going for? What’s your bass / string setup? 1 Quote Link to comment Share on other sites More sharing options...
johnpaulbass Posted November 29, 2020 Author Share Posted November 29, 2020 Hello, thank you guys for the raccomandations 'till now. I was an Mxr m80 user years ago but really didn't like the drive settingm the clean sound 'though is great. Few years back I've had also the tone hammer and indeed it's a great pedal. But as @jrixn1 said I'm intrigued with the microbass of EBS that was mentioned. Said that it's quite overbuget.. Quote Link to comment Share on other sites More sharing options...
Hellzero Posted November 29, 2020 Share Posted November 29, 2020 I guess you meant balanced output... Do you need this to be volume controlled ? Post EQ and pre EQ ? Saturation ? EQ type ? Quote Link to comment Share on other sites More sharing options...
johnpaulbass Posted November 29, 2020 Author Share Posted November 29, 2020 1 hour ago, Hellzero said: I guess you meant balanced output... Do you need this to be volume controlled ? Post EQ and pre EQ ? Saturation ? EQ type ? Jep. Well something like in the tone hammer let’s say Quote Link to comment Share on other sites More sharing options...
Cuzzie Posted November 29, 2020 Share Posted November 29, 2020 Hartke VXL, first edition, built like a tank, spend the other 80-100 notes on bar snacks and mince pies 2 Quote Link to comment Share on other sites More sharing options...
johnpaulbass Posted November 29, 2020 Author Share Posted November 29, 2020 so, thanks again for all your inputs. Ended up finding a great deal in my country for an Aguilar Tone Hammer that also fits my budget so Tone Hammer it is 1 Quote Link to comment Share on other sites More sharing options...
Steve Browning Posted November 30, 2020 Share Posted November 30, 2020 (edited) Oops too late. was going to add this. https://www.thomann.de/gb/palmer_pocket_amp_bass.htm Edited November 30, 2020 by Steve Browning 1 Quote Link to comment Share on other sites More sharing options...
johnpaulbass Posted December 1, 2020 Author Share Posted December 1, 2020 Nice, isn’t it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.