hooky_lowdown Posted November 29, 2020 Share Posted November 29, 2020 I picked up a bass body from a mate, it was covered in some kind of wrap, been on the bass a fair few years I guess. Anyway, I managed to remove the wrap but the glue residue I'm finding impossible to remove. I tried some window cleaner which works pretty well normally, did nothing. Next I sprayed WD-40 on, left it for almost an hour to soak in, that did nothing also. This glue which is in patches seems super stubborn. The body has a poly finish, so any ideas how to remove this stubborn glue, nail polish remover, white spirit maybe? Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted November 29, 2020 Share Posted November 29, 2020 Might be worth trying hand gel hooky, I’ve just removed some stickers from a bass and the gel took the glue off easily 🙂 Quote Link to comment Share on other sites More sharing options...
pete.young Posted November 29, 2020 Share Posted November 29, 2020 I've had some good results removing sticker glue from hard cases in the past with mayonnaise. Sounds bizarre but after a couple of days soaking it took most of the residue off. Never tried it on a bass though. Quote Link to comment Share on other sites More sharing options...
hooky_lowdown Posted November 29, 2020 Author Share Posted November 29, 2020 I don't think hand gel or mayonnaise will remove this glue, it's super stubborn. 😪 Quote Link to comment Share on other sites More sharing options...
Jus Lukin Posted November 29, 2020 Share Posted November 29, 2020 (edited) - Edited March 10, 2022 by Jus Lukin 2 Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted November 29, 2020 Share Posted November 29, 2020 pics? try warming it a little... would of posdibly been better warming the wrap prior to removal. hairdryer rather than heat gun. 1 Quote Link to comment Share on other sites More sharing options...
EBS_freak Posted November 29, 2020 Share Posted November 29, 2020 (edited) 17 minutes ago, PaulThePlug said: pics? try warming it a little... would of posdibly been better warming the wrap prior to removal. hairdryer rather than heat gun. Stay away from heat - if it's poly, you can weaken it and get cracks. Lighter fluid as mentioned above, is a good first step. Try that and get back to us. Edited November 29, 2020 by EBS_freak Quote Link to comment Share on other sites More sharing options...
mckendrick Posted November 30, 2020 Share Posted November 30, 2020 I've used Swarfega on occasion and it worked well. This may not work well on all sticker adhesives. Beyond that, constant patient work with liquid detegent and warm water - this may require a body buff after the job. Old sticker glue can alter the colour tone of the finish - even if it's black! Some may recommend naptha (napthalene) and while I'm sure it'll do the job you'll have difficulty obtaining the raw commodity and you'll need some serious skin, eye and respiratory protection if and while you're using it. Quote Link to comment Share on other sites More sharing options...
EBS_freak Posted November 30, 2020 Share Posted November 30, 2020 If it’s super stubborn, go easy with a toffee/caramel wheel. Quote Link to comment Share on other sites More sharing options...
hooky_lowdown Posted November 30, 2020 Author Share Posted November 30, 2020 I've been told the glue is old dried PVA, which seems to be water resistant. I think lighter fluid might be the way to go. I was also thinking white spirit, but will try lighter fluid first. 👍 Quote Link to comment Share on other sites More sharing options...
MoonBassAlpha Posted November 30, 2020 Share Posted November 30, 2020 If it's PVA, I'd go the gentle heat route, hairdryer. I've tried stripping poly off with heat and a hairdryer wouldn't have touched it. Quote Link to comment Share on other sites More sharing options...
Dan Dare Posted November 30, 2020 Share Posted November 30, 2020 White spirit? I find it removes the glue residue from stickers. Quote Link to comment Share on other sites More sharing options...
BlueMoon Posted December 1, 2020 Share Posted December 1, 2020 As a last resort you might try T-Cut. Solvent-based and poly stands up to it if done gently by hand. Quote Link to comment Share on other sites More sharing options...
songofthewind Posted December 1, 2020 Share Posted December 1, 2020 12 hours ago, Dan Dare said: White spirit? I find it removes the glue residue from stickers. I think white spirit has some oil content, while lighter fluid seems to be pure solvent. I generally get better results with lighter fluid. Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted December 1, 2020 Share Posted December 1, 2020 Normally I would use oil for sticky stuff, probably not WD40. Currently I have a pot of 'adhesive remover' which came with a kit to replace the battery in my macbook (which is glued in), works really well, on the back hidden in all the german text is says 30% acetone, 70% isopropanol. 1 Quote Link to comment Share on other sites More sharing options...
Dan Dare Posted December 1, 2020 Share Posted December 1, 2020 8 minutes ago, songofthewind said: I think white spirit has some oil content, It does have a slight amount. It shouldn't affect a poly finish, though. Much cheaper than naphtha/lighter fluid. Quote Link to comment Share on other sites More sharing options...
MoonBassAlpha Posted December 3, 2020 Share Posted December 3, 2020 On 01/12/2020 at 11:59, Woodinblack said: Normally I would use oil for sticky stuff, probably not WD40. Currently I have a pot of 'adhesive remover' which came with a kit to replace the battery in my macbook (which is glued in), works really well, on the back hidden in all the german text is says 30% acetone, 70% isopropanol. I wouldn't go anywhere near a bass with anything containing acetone. It's vicious stuff on many plastics. Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted December 4, 2020 Share Posted December 4, 2020 8 hours ago, MoonBassAlpha said: I wouldn't go anywhere near a bass with anything containing acetone. It's vicious stuff on many plastics. Wouldn't be my first choice. When I had to remove the sticky stuff from my GK3 pickup on my precision, I just used cooking oil and a bit of effort. Quote Link to comment Share on other sites More sharing options...
dudewheresmybass Posted December 4, 2020 Share Posted December 4, 2020 I’ve found the lighter fluid route the most effective over the years. Good luck!👍👍 Quote Link to comment Share on other sites More sharing options...
rmorris Posted December 5, 2020 Share Posted December 5, 2020 Try White Spirit else https://www.toolstation.com/zep-commercial-sticky-stuff-remover/p64339?utm_source=googleshopping&utm_medium=feed&utm_campaign=googleshoppingfeed&gclid=EAIaIQobChMImfWV7a237QIVA-ztCh2KqgFhEAQYASABEgLCyvD_BwE 1 Quote Link to comment Share on other sites More sharing options...
stevel Posted December 6, 2020 Share Posted December 6, 2020 Similar to the post above, De-Solv-it sticky stuff remover has removed residues that I thought were impossible. Widely available - try B&Q if you can’t find it. Quote Link to comment Share on other sites More sharing options...
bazzbass Posted December 26, 2020 Share Posted December 26, 2020 Isopropyl 99% alcohol will destroy it with one wipe, or two. Apply to cloth, rub over the body. Quote Link to comment Share on other sites More sharing options...
MoonBassAlpha Posted December 26, 2020 Share Posted December 26, 2020 By that reasoning, maybe a high alcohol hand - sanitizer would work well. At least that's widely available these days! ! Quote Link to comment Share on other sites More sharing options...
hooky_lowdown Posted December 26, 2020 Author Share Posted December 26, 2020 So I tried lighter fluid - did nothing. Then tried white spirit, left it on for 30 mins, again did nothing. I resolved it by putting water, washing up liquid and some white spirit into a bottle, covering the bass with single sheets of toilet paper, dribbling the liquid over the bass, so the toilet paper soaks up the liquid, then tightly covered it with cling film. Left it for a day and a half. It was messy, but was able to scrap the residue off with the edge of a cd. There were a few little marks leftover, but applied some lighter fluid, and it polished up nicely. 1 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.