Jump to content
Why become a member? ×

Telecision bass build


Jimothey
 Share

Recommended Posts

I've started another build which is a tele/precision hybrid

I've seen lots of precision bodies with a modified telecaster pickguard but I haven't seen any the other way round so I thought I'd give it a go 

_20201205_083957.thumb.JPG.69c17e11e6df0a8d739a7b925625adab.JPG

I've used some recycled pine I had kicking about for the body, Its going to have a maple/maple neck, Tele style headstock and I'm going to finish it in a solid Butterscotch/Blonde White-ish colour not sure about hardware colour yet as both I think suit the colour really well 👍🏻

  • Like 5
Link to comment
Share on other sites

2 hours ago, PaulThePlug said:

Subtle n simple... Nice

Initial familiarity of the pickup and pickguard to the eye... Then the 'Tele' difference to the body. Bit like when reverse headstocks started making an apperance. You going reversed Tele-stock?

I'm considering a reverse headstock just trying to find a cheap enough lefty neck

3 hours ago, Si600 said:

Not yellow this time?

Well its kinda yellow-ish if it doesn't go butterscotch then it will be white 

2 hours ago, SpondonBassed said:

Give it a minute or two.  Remember who you're asking.  Heeheehee.

Good to see you back on it Jim!

Cheers 👍🏻

Link to comment
Share on other sites

2 hours ago, PaulThePlug said:

Fate telling ya to keep it wood... Danish?

If I was making the body out of a nice bit of Ash etc then that would be an option but its made out of a old scaffold board so I've had to do a lot of filling so its going to have to be a solid colour and I've got some satin White at work 👍🏻

Link to comment
Share on other sites

1 hour ago, Jimothey said:

I must be getting a bit more reserved in my old age or it could be that the bold colour schemes I did looked a badgers derrière so time to tone it down a bit 😁

But remember, to a horny badger, that can look hot!

Perhaps a bit niche though.

  • Haha 1
Link to comment
Share on other sites

  • 1 month later...

I found an old neck that I've used on this build and decided to go for a matching headstock 

_20210118_130301.thumb.JPG.09c4e854ffc3a0408e210493b9a1cc8c.JPG

Just got to wait for the headstock to dry then I can refit the tuners, now just waiting for the wiring harness and strap buttons to turn up!..... 👍🏻

  • Like 3
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...