Pow_22 Posted March 13, 2021 Share Posted March 13, 2021 (edited) So, in short ive always been a P bass/Flatwound player for as long as i can remeber. I discovered flatwound perfection for me in the Elites Detroit flatwounds and have happily thumped away for around 10 or so years on these with various p basses. Fast forward to my lockdown band project recording remotely (which the Ampeg SVT Tube DI is phenominal for BTW) and i was clear i needed something a bit more modern. I HATE rounds, their shrill top end, unconrollable harmonics that always seem to lack proper thump - i tried allsorts - nickels, steels and alloys. I got close to a good sound with the Elites Grounds but the E died too quick. Tried the D'addario halfs which were good but still not quite right and just as i was about to order some GHS Brite Flats someone mentioned GHS Pressurewounds. Now years ago i did tinker with DR Fat Beams which were apparently similar in construction i.e compression wound so i thought i knew what to expect. Well, the Pressurewounds arrived and i strung them up - meh, felt nice but to my flatwound biased ear they just sounded like rounds. I left them on and kept picking up the bass (a USA Peavey Unity bass) and tinkering with the setup. About 24hrs in and id say around 6 or 7 hours on the strings they are now starting to sound EXACTLY what i had in my head. The depth and fundamental is there, its a thumpy punch. The hights are tamed but not dead, The E rings but isnt shrill, it has beef! If i could change ONE thing it would be a little more tension but sound wise im really enjoying these after years and years on flats. They will certianly be going on my incoming Spector! Edited March 13, 2021 by Pow_22 Sausage finger typing 2 Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted March 13, 2021 Share Posted March 13, 2021 I’ve never really looked into these before but your review changed that, from what I hear on YouTube they sound really nice, I might look into a set for one of my Jazzes. 1 Quote Link to comment Share on other sites More sharing options...
Pow_22 Posted March 13, 2021 Author Share Posted March 13, 2021 Honestly, if youdve said to me a few weeks ago that not only would i have a bass without flatwounds on it but that id actually really like it id’ve required you to take a drugs test Not cheap, bass direct seem cheapest from what ive seen so far, but lovely. Dont make my mistake though and judge them straight away (or maybe thats just a flatwound user error) 1 Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted March 13, 2021 Share Posted March 13, 2021 Well I’m a confirmed round wound user but I like the idea of beefing up a Jazz without losing the top end in the way that happens with flats, so these seem ideal. Quote Link to comment Share on other sites More sharing options...
TheGreek Posted March 13, 2021 Share Posted March 13, 2021 I couldn't find anything on YT that was of any use...Links please? Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted March 13, 2021 Share Posted March 13, 2021 I found these Quote Link to comment Share on other sites More sharing options...
TheGreek Posted March 13, 2021 Share Posted March 13, 2021 Found both of those. Didn't find the first one very helpful as I play Bass like a bassist - not a failed guitarist. Likewise I found the second one too short to be able to do a direct comparison. Quote Link to comment Share on other sites More sharing options...
Hellzero Posted March 14, 2021 Share Posted March 14, 2021 Hey Mick, better watch all of the first video as he's really playing like a bassist after that dusty end introduction... That said, the Alembic CX3 strings are the same and according to many people exactly the same strings built by GHS for them. These are indeed excellent strings with all the advantages of both types and not the disadvantages, except that they tend to rust very quickly : thank you nickel-iron... I had the Alembic CX-3 on my Alembic's and they simply were the best strings you can put on these basses. You can even buy a 6 strings set by Alembic and I think this CX-3/30LCB set will go on my newly acquired Le Fay Remington Steele 6 RHT CC CAP Big Block. http://www.alembic.com/prod/strings.html Quote Link to comment Share on other sites More sharing options...
uncle psychosis Posted March 18, 2021 Share Posted March 18, 2021 I used to use GHS Pressurewounds and for some reason I stopped using them. I can't remember if its because they were hard to get hold of or whether I stopped liking them 😂 Quote Link to comment Share on other sites More sharing options...
fretlessguy Posted March 26, 2021 Share Posted March 26, 2021 They have a lot of advantages. Smooth to the touch, which is kind to your fingers, frets, and fret boards if you like fretlesses. I like the sound, which has both flat and round wound tones. They are not that expensive. And yes, Lozz196, they work quite well on Jazz Basses. They do calm the highs down without losing the top end. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.