New Ibanez Mikro GSRM20 neck £50 NL

[HazBeen]

I recently acquired a new (replacement parts) Ibby Mikro bass neck, totally unused and not drilled. Unfortunately for the project I was planning the nut is not wide enough, so looking if I can make someone else happy.

Looking to get what I paid (50 quid) price excludes shipping.

[songofthewind]

Interesting, might work for a project of mine.

What are the nut and neck butt dimensions, please?

[HazBeen]

1 hour ago, songofthewind said:

Interesting, might work for a project of mine.

What are the nut and neck butt dimensions, please?

28.6” scale, 38mm at nut, 59mm at last fret

[songofthewind]

Ah, bugger. Scale too short, butt too narrow, nut just right. Thank you very much for looking!

[Stuey3D]

I know this is old, but any chance you still have this?

[Stuey3D]

Actually don’t worry about replying, not going to need the neck now anyway I’ve replaced the entire bass and will get some paint and make the broken one an art piece with the family. 

[HazBeen]

I do still have it btw…

[alyctes]

I think they make a five-string...   a neck might suit your project?

[Stuey3D]

Oh god now I’m tempted, if shipping to the UK isn’t bank busting I may be able to get this neck in a couple of weeks once the heat from the wife for buying another full bass dies down. 
 

could then use the old one with this neck as a lower tuning Mikro Bass. 
 

I had been upgrading my Mikro for a few weeks and was putting the final touches on it the other night and stuck Labella Jamersons on her, had the action almost perfect but the neck bow was around a full 1mm when fretted on the 1st & 17th and checked over the 7th. Thought I could tighten the truss rod to get it down to the .3mm I had before with my D’addario Chromes and then suddenly CRACK truss rod snaps, gutted.

 

Managed to convince the wife to let me buy another full Mikro she isn’t happy as I have 5 other basses but for me the Mikro is my favourite to play as it’s the most comfortable. 
 

If the shipping isn’t going to be too much then I might nab this off you when the wife chills out a bit as it would be a shame for my baby to go to waste.

[HazBeen]

7 hours ago, Stuey3D said:

Oh god now I’m tempted, if shipping to the UK isn’t bank busting I may be able to get this neck in a couple of weeks once the heat from the wife for buying another full bass dies down. 
 

could then use the old one with this neck as a lower tuning Mikro Bass. 
 

I had been upgrading my Mikro for a few weeks and was putting the final touches on it the other night and stuck Labella Jamersons on her, had the action almost perfect but the neck bow was around a full 1mm when fretted on the 1st & 17th and checked over the 7th. Thought I could tighten the truss rod to get it down to the .3mm I had before with my D’addario Chromes and then suddenly CRACK truss rod snaps, gutted.

 

Managed to convince the wife to let me buy another full Mikro she isn’t happy as I have 5 other basses but for me the Mikro is my favourite to play as it’s the most comfortable. 
 

If the shipping isn’t going to be too much then I might nab this off you when the wife chills out a bit as it would be a shame for my baby to go to waste.

Shipping would be 15 quid, just dm me if you want to proceed. Am not often on BC nowadays.

[Stuey3D]

Thanks to @HazBeen my original Mikro has now been repaired. 
 

Thank you so much for the speedy well packaged neck dude, I am well happy even if I did accidentally put a slight hole in the fretboard with my lame drilling skills.