Any one help with Presonus studio Live 32s Mixer

[gelfin]

I have just moved from a Soundcraft LX7 24channel mixer to a Presonus Studio Live 32s. (with 2 NSB 16-8 stage boxes)

It is a powerful beast of a mixer and a lot to take in. 

I have a problem with mix (aux) sends to the stage boxes. All 16 are fine from the rear panel analogue outputs

but nothing from the stage boxes.

Any clues would be greatfuly appreciated.

[Bigguy2017]

I'm not totally familiar with the specific desk BUT...

 

It's either;

AVB network cable faulty - try another CAT6 cable

Select the Right Ethernet Cable | PreSonus

Setup in the mixer - does Aux over AVB have to be enabled in a setup menu?

Mixer firmware issue - have you updated to the latest version?

It's unlikely both stage boxes are faulty (unless there is a firmware version incompatibility).

 

Can't think of anything else...

 

[Bigguy2017]

See  AVB Ecosystem Checklist | PreSonus  

[Bigguy2017]

An Introduction to AVB Networking | PreSonus

Check your in/out signal patching