WITHDRAWN SONIFEX RB-HD2 HEADPHONE AMPLIFIER NOW £120 £150 Northampton

[BCH]

WITHDRAWN SONIFEX RB-HD2 HEADPHONE AMPLIFIER Analogue, 2 stereo outputs

NOW£120

Excellent condition and fully working. Great for live wired IEM or headphone rehearsals /studio. Original box

I also have a Sonifex 1 output unit

 

The RB-HD2 is a high performance 2-way stereo headphone distribution amplifier for driving up to 2 pairs of professional stereo headphones from a single stereo or mono input. A switch on the rear panel enables the distribution of a mono signal to all four outputs (i.e. both earpieces of a pair of stereo headphones) via the left channel input. The stereo/mono switch is located on the rear panel to prevent accidental knocking.

The XLR-3 inputs are electronically balanced and can be wired unbalanced. There are two pre-set controls on the rear panel that adjust the level of the master input signal to the outputs. Each output is on a ¼” stereo jack socket and is designed to drive 150mW into 32 ohm to 600 ohm stereo headphones. The outputs are individually buffered with their own front panel volume control. A LED power indicator on the front panel displays the power supply connection.

Audio
Input Impedance	>20kΩ balanced bridging (main)
Max Input Level	+28dBu
Input Gain Range	-12dB to +20dB gain (pre-set pots)
Output Level	Drives 150mW into 32Ω to 600Ω headphones
Volume Controls	-80dB to +11dB gain
Connections
Main Stereo Inputs	2 x XLR 3 pin female (balanced, can be unbalanced)
Outputs	2 x ¼” (6.35mm) A-gauge 3-pole stereo jack sockets
Mains Input	Filtered IEC, switchable 110-120V, or 220-240V, fused, 9W max
Fuse Rating	Anti-surge fuse 100mA 20 x 5mm (230VAC)
	Anti-surge fuse 250mA 20 x 5mm (115VAC)
Dimensions (WxDxH)	48.0 cm x 10.8 cm x 4.2 cm
Boxed Dimensions (WxDxH)	53.0 cm x 20.5 cm x 6. cm
Weight	1.35 kg
Boxed Weight	2.00 kg

https://www.canford.co.uk/Products/95-645_SONIFEX-RB-HD2-HEADPHONE-AMPLIFIER-Analogue-2-stereo-outputs

Collection or post UK only £12

 

Edited June 29, 2021 by BCH
Withdrawn