stewblack Posted June 12, 2021 Share Posted June 12, 2021 (edited) Just wanted a general thread about the use of the SA software and hardware to save me entirely hijacking the C4 thread. Thought we could post questions, share tricks and tips. I have one such query ready to go! 4 pedals connected to the hub, USB connecting hub to PC. When I click on the icon for my pedals I see this for each of them except the Ultrawave. When I select the Ultrawave I see this I notice the available controls are identical to those on the pedal. I also notice altering them makes no discernible difference to the sound of the pedal. Here are my questions: What the hell? Why can't I edit the Ultrawave? Edited June 12, 2021 by stewblack grammar Quote Link to comment Share on other sites More sharing options...
AxelF Posted June 13, 2021 Share Posted June 13, 2021 I can't see what version of the pc software you're using, but you'll need to update to the 0.8.32 beta version to edit the Ultrawave if you haven't already done so? Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 13, 2021 Share Posted June 13, 2021 (edited) The UW far exhausts the capability of what information the hub can store so only stores a small set of parameters. As a compromise, the Hub scene saving can be used to directly recall UW presets (this is the first pedal where this is possible). I haven’t yet used the Hub to edit the UW - I have only ever plugged that in directly. Edited June 13, 2021 by Quatschmacher Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 13, 2021 Author Share Posted June 13, 2021 That's great thank you. Excludes the possibility I'm doing something wrong. Quote Link to comment Share on other sites More sharing options...
SumOne Posted June 17, 2021 Share Posted June 17, 2021 Does anyone know if there is a setting buried somewhere on Neuro or on the DMC micro to stop the DMC turning on the C4 while scrolling through preset numbers? Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 17, 2021 Author Share Posted June 17, 2021 That would be in the midi pedal I think. Mine is a different make but I can set it up to scroll and select or automatically select. 1 Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 18, 2021 Share Posted June 18, 2021 (edited) 14 hours ago, SumOne said: Does anyone know if there is a setting buried somewhere on Neuro or on the DMC micro to stop the DMC turning on the C4 while scrolling through preset numbers? The C4 presets load in whatever engage/bypass state is stored in the preset. If you want to load them bypassed when using PC messages then you will need to edit and resave the presets with the state-upon-load button set to “bypass”. This is one area where using the Hub is good as there are separate CCs for “load engaged” and “load bypassed”. Edited June 18, 2021 by Quatschmacher 1 Quote Link to comment Share on other sites More sharing options...
SumOne Posted June 18, 2021 Share Posted June 18, 2021 (edited) 9 hours ago, Quatschmacher said: The C4 presets load in whatever engage/bypass state is stored in the preset. If you want to load them bypassed when using PC messages then you will need to edit and resave the presets with the state-upon-load button set to “bypass”. This is one area where using the Hub is good as there are separate CCs for “load engaged” and “load bypassed”. I'm not sure why, but saving presets as 'bypassed' doesn't solve it either. The DMC still automatically turns the C4 on when scrolling through any presets (whether they are set to bypassed or not as a preset). I assume it's the DMC causing the issue because if the DMC uses its device preset page list (e.g preset A001, A002 etc, for device A) then long holding the left FS will engage/disengage it sending anything to the C4, so you can disengage while scrolling through presets then hold down again to engage. It's a bit of a shame though as the DMC main preset list (e.g. P001 etc.) is the one that you can rename the presets on the DMC display but you can't disengage by holding down the left FS when viewing that list as it goes to 'save'. There's probably a solution buried somewhere in the DMC menus but I'll give up for now as it might just be because I'm using a Beta version for the preset naming function and they haven't ironed everything out yet. Edited June 18, 2021 by SumOne Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 18, 2021 Author Share Posted June 18, 2021 How do you turn the pedals off again? Using the hub, I mean. Is it just a case of saving a preset with all the pedals off? Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted June 18, 2021 Share Posted June 18, 2021 27 minutes ago, stewblack said: How do you turn the pedals off again? Using the hub, I mean. Is it just a case of saving a preset with all the pedals off? Yes, you could save a scene with all pedals bypassed. Or program a button then sends the disengage command on all connected channels, which means you could bypass all pedals in any scene. 1 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.