Quatschmacher Posted January 8, 2020 Author Share Posted January 8, 2020 (edited) Also of note is that there is now an undo/redo feature within the editor using the standard commands of CTRL+Z and CTRL+Y. You can now also use the UP and DOWN cursor keys to skip banks in the editor. The new skin is nice too: Edited January 8, 2020 by Quatschmacher Quote Link to comment Share on other sites More sharing options...
reesource Posted January 8, 2020 Share Posted January 8, 2020 Lots of improvements, and that new skin is a VAST improvement! Excellent stuff. 1 Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted January 16, 2020 Author Share Posted January 16, 2020 (edited) For Mac users who might have been experiencing problems after updating to Catalina where the FI firmware update or patch writing doesn't work, please remember to update the driver for your interface too! This particular issue came up for @SICbass with his Roland UM-One MKII and there is an updated driver which fixes the issue: https://www.roland.com/global/support/by_product/um-one_mk2/updates_drivers/e1812bfc-104a-4a18-a1db-b07980c0732c/ Edited January 16, 2020 by Quatschmacher Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted January 28, 2020 Author Share Posted January 28, 2020 Price has dropped to €299 again: http://pandamidi.com/store/future-impact-i-bass-guitar-synth 1 Quote Link to comment Share on other sites More sharing options...
SICbass Posted January 29, 2020 Share Posted January 29, 2020 Holy Schamoly!! Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted February 2, 2020 Author Share Posted February 2, 2020 Just uploaded a couple of new patches to the file share: https://auraplug.com/fidatabase2/ Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted February 3, 2020 Author Share Posted February 3, 2020 (edited) Here are a couple more: https://soundcloud.com/peter-kenney-750235819/nerve-pain-2 No idea what the flip is going on with my second file; BC keeps saying it can't find the file when it tries to embed it so I've included it as a link instead. Edited February 3, 2020 by Quatschmacher Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted February 3, 2020 Author Share Posted February 3, 2020 @GisserD I've added a special one for you to the share site. 1 Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 3, 2020 Share Posted February 3, 2020 1 minute ago, Quatschmacher said: @GisserD I've added a special one for you to the share site. I will take a look tomorrow with enthusiasm Thanks Q 1 Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted February 3, 2020 Author Share Posted February 3, 2020 39 minutes ago, GisserD said: I will take a look tomorrow with enthusiasm Thanks Q I've added a bunch more patches to the share site, quite a few are ones I released demos of prior to the v3 release so you may have heard them already. Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted February 3, 2020 Author Share Posted February 3, 2020 Anyone else experiencing multiple editor crashes on Windows 10 since the recent big Microsoft update? Quote Link to comment Share on other sites More sharing options...
SICbass Posted February 4, 2020 Share Posted February 4, 2020 8 hours ago, Quatschmacher said: Anyone else experiencing multiple editor crashes on Windows 10 since the recent big Microsoft update? No, but over at the "Catalina Ranch" things aren't too rosey now either. I can load a patch onto the editor and edit, save etc. but it then freezes on that patch, not allowing me to load another. It allows you to start the load process but when you've found a patch and press open, nothing happens. It just stays on the previous patch. Even a restart didn't help. Then at some random and indeterminate time you can load another patch which then becomes the new "frozen" patch... and so on... Quote Link to comment Share on other sites More sharing options...
Leonard Smalls Posted February 4, 2020 Share Posted February 4, 2020 Anybody else suffering a low-level high pitched whistle from their FI? Is it likely to suffer impedance issues when connected to a FX loop blender with other FX on other loops? It's only the FI producing a whistle - not the BassWhammy, FwonkBeta or 3Leaf Envelope Filter... Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted February 4, 2020 Author Share Posted February 4, 2020 2 hours ago, SICbass said: No, but over at the "Catalina Ranch" things aren't too rosey now either. I can load a patch onto the editor and edit, save etc. but it then freezes on that patch, not allowing me to load another. It allows you to start the load process but when you've found a patch and press open, nothing happens. It just stays on the previous patch. Even a restart didn't help. Then at some random and indeterminate time you can load another patch which then becomes the new "frozen" patch... and so on... If you’re able to replicate it consistently, would you mind documenting the steps and sending it to Panda as it’ll help to get a fix made. My problem is quite random at the moment and the MIDI from my interface seems to have gone absolutely berserk and creates totally random settings when I change patches (routing via the MC8 over USB seems mostly ok). Don’t know what other craziness and system slowing the Windows update has introduced. Might have to roll it back. Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted February 4, 2020 Author Share Posted February 4, 2020 2 hours ago, Leonard Smalls said: Anybody else suffering a low-level high pitched whistle from their FI? Is it likely to suffer impedance issues when connected to a FX loop blender with other FX on other loops? It's only the FI producing a whistle - not the BassWhammy, FwonkBeta or 3Leaf Envelope Filter... No, I’m not experiencing that, but your other pedals could also be masking the source of the noise as filter pedals will shave off the high frequencies. Quote Link to comment Share on other sites More sharing options...
Al Krow Posted February 4, 2020 Share Posted February 4, 2020 13 hours ago, Quatschmacher said: Anyone else experiencing multiple editor crashes on Windows 10 since the recent big Microsoft update? Does the editor require Windows 10 to work, or will it work just fine on earlier versions eg Windows 7? Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted February 4, 2020 Author Share Posted February 4, 2020 (edited) 41 minutes ago, Al Krow said: Does the editor require Windows 10 to work, or will it work just fine on earlier versions eg Windows 7? Works on every OS from 7 upwards. There are 32-bit and 64-bit versions. Edited February 4, 2020 by Quatschmacher 1 Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 4, 2020 Share Posted February 4, 2020 20 hours ago, GisserD said: I will take a look tomorrow with enthusiasm Thanks Q @Quatschmacher thanks for the great sounding patch! . its going onboard right next to "squanchy" it inspired a little bass jam from me... bassjam1.mp3 2 Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted February 4, 2020 Author Share Posted February 4, 2020 1 hour ago, GisserD said: @Quatschmacher thanks for the great sounding patch! . its going onboard right next to "squanchy" it inspired a little bass jam from me... bassjam1.mp3 946.94 kB · 10 downloads Sounds wicked! Could I please use it as the sample clip for the patch on the database website? I'll credit you obviously. Quote Link to comment Share on other sites More sharing options...
GisserD Posted February 4, 2020 Share Posted February 4, 2020 19 minutes ago, Quatschmacher said: Sounds wicked! Could I please use it as the sample clip for the patch on the database website? I'll credit you obviously. Of corse! 1 Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted February 4, 2020 Author Share Posted February 4, 2020 2 hours ago, GisserD said: Of corse! Done, thanks! Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted February 4, 2020 Author Share Posted February 4, 2020 (edited) I've put together a commercial bank for my Patreon members but wanted to release this one from it for free as it's cool: On the file share it's called "QM Single Square Mouthful u2". Enjoy! Edited February 5, 2020 by Quatschmacher Quote Link to comment Share on other sites More sharing options...
Kiwi Posted February 5, 2020 Share Posted February 5, 2020 1 hour ago, Quatschmacher said: On the file share it's called "QM Single Square Mouthful u2". Enjoy! That is so 80's and Soul Train lol 1 Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted February 5, 2020 Author Share Posted February 5, 2020 (edited) On 03/02/2020 at 23:43, Quatschmacher said: Anyone else experiencing multiple editor crashes on Windows 10 since the recent big Microsoft update? PANIC OVER! It seems the problem lies elsewhere than Windows. I’m investigating. Thought it was the Source Audio Hub at first but seems like it might be the MC8 in combination with the Focusrite. I’ll report back again once I’ve figured it out. EDIT - does seem to be something when sending MIDI to the MC8 from the Focusrite over the DIN port (though not over USB). I wonder if it has anything to with potentially the editor sending commands to the MC8 which are triggering its internal CC responses which is then causing the MC8 to spit out the accompanying CCs which are then getting sent along with the CCs from the editor which set the parameters for a patch. If so, it could be screwing up the FI. Though why that wouldn’t also happen over USB is a mystery. The other bizarre thing that is happening is that occasionally fast expression messages from the MC8 are locking up my Hub. This was the initial reason I thought it might be the Hub but I guess this could be another, separate MC8 issue. Edited February 5, 2020 by Quatschmacher Quote Link to comment Share on other sites More sharing options...
Quatschmacher Posted February 5, 2020 Author Share Posted February 5, 2020 Working on some double bass patches; any preferences? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.