Chienmortbb Posted August 9, 2021 Share Posted August 9, 2021 (edited) Tbe cabinet is £40 if collected. Postage on application. This is one of the earlier BC112 cabinets. It was designed with the horn positions horizontally. The later cabinet had the horn positioned vertically and was 3cm taller. If you just want to use it without a horn/tweeter, just block/fill the hole. The cab includes the handle and wadding is already installed. The pictures show the cabinet loaded with a Beyma 12CVM2. This has been sold separately Edited August 9, 2021 by Chienmortbb Quote Link to comment Share on other sites More sharing options...
Oldman Posted August 10, 2021 Share Posted August 10, 2021 Would you happen to have a component list of recommended drivers and crossover? Thanks Quote Link to comment Share on other sites More sharing options...
Chienmortbb Posted August 11, 2021 Author Share Posted August 11, 2021 (edited) The original design used a Beyma SM212 12" driver together with a Celestion CDX1-1445 compression driver mounted on a P-Audio PH170 Horn. Sadly the SM212 is now discontinued. The closest replacement is the Beyma 12CVM2, that is the driver in the picture but that one has sold separately. The original crossover should work reasonably well and that is shown HERE. The alternative is to use the later design using then Faital Pro PR320 12" Driver plus the Celestion CDX!-1415 compression driver and the PH170 horn. The crossover for that is shown HERE. The cabinet is sligtly shorter than the later one using the PR320, by 3cm. This will reduce the cab volume slightly meaning a small reduction in the absolute low end and possibly a small increase in sound level in the low mids. I have gigged this cab with only the 12CVM2 driver. Edited August 11, 2021 by Chienmortbb Quote Link to comment Share on other sites More sharing options...
Oldman Posted August 11, 2021 Share Posted August 11, 2021 (edited) Thank you for your comprehensive reply, very informative. I looked through the information it’s beyond my toolkit, fascinating. Over 40 years ago I was right into this helping an old work colleague in Liverpool (John Gee for those who know him) with his cab designs in so far as I road tested them. The last one was a 2x15” half W cab. I visited John a few years ago in Warrington his new place, he still has that old unfinished cab!! Sorry to digress. Edited August 11, 2021 by Oldman Quote Link to comment Share on other sites More sharing options...
Stub Mandrel Posted August 11, 2021 Share Posted August 11, 2021 Chiefly out of curiosity - what does it weigh? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.