Osiris Posted October 16, 2021 Share Posted October 16, 2021 I have an old cable, it wasn't expensive but has been trouble free for years. It only gets used in the house so doesn't need to be anything special. Anyway, it has a cheapy angled jack on one end that had developed a loose connection so I cut it off and have soldered a brand new Neutrik angled jack on in its place. I'm no expert with a soldering iron but have successfully made up a number of cables without issue over the years. It looked OK when I put it back together, the shielded core went to the jack pin and the non-shielded copper core went to the little tag thingy, just the same as the knackered jack that I'd removed. There was no obvious contact between the cores, both of which had been tinned first and the connections looked clean and solid to me. But once the cable was reassembled I noticed that the tone is much darker i.e. with noticeably less treble content than before. Any ideas why that is? Have I done anything obviously wrong? Anything I can do to restore the missing treble from it? Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted October 16, 2021 Share Posted October 16, 2021 7 minutes ago, Osiris said: I noticed that the tone is much darker i.e. with noticeably less treble content than before Sounds like you’ve made yourself a reggae cable , can you let me know what you did 😁 2 13 Quote Link to comment Share on other sites More sharing options...
Stub Mandrel Posted October 16, 2021 Share Posted October 16, 2021 Just turn the little knob on top. https://www.neutrik.com/en/product/np2rx-timbre Quote Link to comment Share on other sites More sharing options...
Stub Mandrel Posted October 16, 2021 Share Posted October 16, 2021 It's possible, but highly unlikely, you have done something that's created a significant amount of extra capacitance in the lead Quote Link to comment Share on other sites More sharing options...
skankdelvar Posted October 16, 2021 Share Posted October 16, 2021 There's a simple, folkloric solution to this common problem. Crack a hazelnut and the sound of it cracking will awaken the spirit goblin who guards your house and he'll restore the top end. Give it a try and let us know how you get on. 1 3 Quote Link to comment Share on other sites More sharing options...
bartelby Posted October 16, 2021 Share Posted October 16, 2021 Years back I bought a 10 m length of, quality, cable and 4 Neutrik plugs (3 straight and one right angled). Cut the cable in half and soldered on the plugs, creating 2 5m cables. One is much darker sounding that the other, to the point of it being pretty unusable. The darker one has the right angled plug! 1 Quote Link to comment Share on other sites More sharing options...
Ricky 4000 Posted October 16, 2021 Share Posted October 16, 2021 Wow, weird shít happens... 🤷♀️ 1 Quote Link to comment Share on other sites More sharing options...
Osiris Posted October 16, 2021 Author Share Posted October 16, 2021 24 minutes ago, Stub Mandrel said: Just turn the little knob on top. https://www.neutrik.com/en/product/np2rx-timbre Unfortunately it's not one of those jack types 😉 19 minutes ago, Stub Mandrel said: It's possible, but highly unlikely, you have done something that's created a significant amount of extra capacitance in the lead If so, any idea how that can be rectified, if at all? Quote Link to comment Share on other sites More sharing options...
Osiris Posted October 16, 2021 Author Share Posted October 16, 2021 10 minutes ago, skankdelvar said: There's a simple, folkloric solution to this common problem. Crack a hazelnut and the sound of it cracking will awaken the spirit goblin who guards your house and he'll restore the top end. Give it a try and let us know how you get on. It's the wrong season for hazelnuts in my mind. Would a macadamia work, or at a push an almond? Quote Link to comment Share on other sites More sharing options...
Raymondo Posted October 16, 2021 Share Posted October 16, 2021 How can you hear "Darker"? Shirley that describes a visual effect? Crumbs you Egyptian Gods are something else obvz! 1 2 Quote Link to comment Share on other sites More sharing options...
Osiris Posted October 16, 2021 Author Share Posted October 16, 2021 10 minutes ago, bartelby said: Years back I bought a 10 m length of, quality, cable and 4 Neutrik plugs (3 straight and one right angled). Cut the cable in half and soldered on the plugs, creating 2 5m cables. One is much darker sounding that the other, to the point of it being pretty unusable. The darker one has the right angled plug! Funnily enough, although the new jack hadn't been used before, I've had it for years, I bought a load in bulk probably 10 years or more ago. Still got around a dozen left too. Maybe there was a duff batch at the time? 2 Quote Link to comment Share on other sites More sharing options...
Ricky 4000 Posted October 16, 2021 Share Posted October 16, 2021 Soldering is one of the dark arts, if you ask me (exuse the pun). Quote Link to comment Share on other sites More sharing options...
obbm Posted October 16, 2021 Share Posted October 16, 2021 (edited) What brand of cable? Have you got a photo of the inside of the jack? Edited October 16, 2021 by obbm Quote Link to comment Share on other sites More sharing options...
skankdelvar Posted October 16, 2021 Share Posted October 16, 2021 3 minutes ago, Osiris said: It's the wrong season for hazelnuts in my mind. Not a bit of it. Hazelnut harvesting time is September and October, depending on one's geographic location and the type of Hazel. 7 minutes ago, Osiris said: Would a macadamia work, or at a push an almond? If you're looking for alternatives you could try filberts because that's another name for hazelnuts. Quote Link to comment Share on other sites More sharing options...
Frank Blank Posted October 16, 2021 Share Posted October 16, 2021 20 minutes ago, Osiris said: It's the wrong season for hazelnuts in my mind. Would a macadamia work, or at a push an almond? Quote Link to comment Share on other sites More sharing options...
leftybassman392 Posted October 16, 2021 Share Posted October 16, 2021 21 minutes ago, Raymondo said: Crumbs you Egyptian Gods are something else obvz! It would be nice to be able to say 'you heard it here first'................... 1 5 Quote Link to comment Share on other sites More sharing options...
nilebodgers Posted October 16, 2021 Share Posted October 16, 2021 Has the cable got a semiconducting layer? It’s usually a black layer in between the core and the shield and it can be easy to let it touch the core if you aren’t careful. You can end up with a high resistance short between hot and earth and a much increased cable capacitance that can make the cable sound very strange. (look at Van Damme Pro Grade Classic XKE Instrument Cable for an example) 5 Quote Link to comment Share on other sites More sharing options...
skankdelvar Posted October 16, 2021 Share Posted October 16, 2021 Basically, with angled jacks the signal is going along in a straight line then suddenly has to go through an unexpected 90-degree turn. The lower frequencies move more slowly so they make it through the turn, no problem. The faster moving and frankly irresponsible high frequencies just spin out and never make it to the amplifier. Like I say, crack a hazelnut and have a cuppa while the spirit goblin sorts it out. 6 Quote Link to comment Share on other sites More sharing options...
paul_5 Posted October 16, 2021 Share Posted October 16, 2021 Good job it’s not a curly lead, could you imagine one of those into a 90 degree jack?!? 1 1 Quote Link to comment Share on other sites More sharing options...
Osiris Posted October 16, 2021 Author Share Posted October 16, 2021 49 minutes ago, nilebodgers said: Has the cable got a semiconducting layer? It’s usually a black layer in between the core and the shield and it can be easy to let it touch the core if you aren’t careful. You can end up with a high resistance short between hot and earth and a much increased cable capacitance that can make the cable sound very strange. (look at Van Damme Pro Grade Classic XKE Instrument Cable for an example) Thanks for that. I think I know what you're talking about and if so, then yes I think it has got a semiconducting layer. Of the 2 cores running through the cable there's the outer non-shielded copper core and the shielded core. The shielded one has 2 covering layers (I appreciate this probably isn't the correct term but it'll do if you know what I'm referring to!) a black outer layer and an inner clear layer. I noticed on the old plug that the black outer layer was trimmed further back, maybe 10-15mm or so leaving the clear inner layer covering the core pretty much up to around 1mm away from the solder joint. Not knowing any difference, and being lazy sod, I trimmed both layers off equally a mm or 2 short of the new solder joint. I'll dismantle the cable tomorrow and trim the black layer back and try again. Hopefully it's that simple. 2 Quote Link to comment Share on other sites More sharing options...
Osiris Posted October 16, 2021 Author Share Posted October 16, 2021 42 minutes ago, skankdelvar said: Basically, with angled jacks the signal is going along in a straight line then suddenly has to go through an unexpected 90-degree turn. The lower frequencies move more slowly so they make it through the turn, no problem. The faster moving and frankly irresponsible high frequencies just spin out and never make it to the amplifier. Like I say, crack a hazelnut and have a cuppa while the spirit goblin sorts it out. Welly is currently awash with a plague of squirrels, no doubt sent by the object of desire of that cack-handed idiot from a few posts above. There's nary a nut to be seen around these parts, unfortunately. 1 1 Quote Link to comment Share on other sites More sharing options...
Jus Lukin Posted October 16, 2021 Share Posted October 16, 2021 (edited) - Edited March 15, 2022 by Jus Lukin 1 Quote Link to comment Share on other sites More sharing options...
Frank Blank Posted October 16, 2021 Share Posted October 16, 2021 34 minutes ago, paul_5 said: Good job it’s not a curly lead, could you imagine one of those into a 90 degree jack?!? 90 Degree Jack..? Isn’t he still in the Scrubs doing a five stretch for larceny? 3 Quote Link to comment Share on other sites More sharing options...
Dan Dare Posted October 17, 2021 Share Posted October 17, 2021 Sorry to be sensible, but when you say "darker", do you mean fatter, with more lows? If so, it could be that you have improved the lead, which you say was a cheapie, by making a decent contact between it and the new plug (which, being a Neutrik, probably makes a better connection than the old one). The highs could be the same as they were, but you perceive it as darker/fuller because you are now hearing the low end properly as well. Quote Link to comment Share on other sites More sharing options...
Osiris Posted October 17, 2021 Author Share Posted October 17, 2021 3 hours ago, Dan Dare said: Sorry to be sensible, but when you say "darker", do you mean fatter, with more lows? If so, it could be that you have improved the lead, which you say was a cheapie, by making a decent contact between it and the new plug (which, being a Neutrik, probably makes a better connection than the old one). The highs could be the same as they were, but you perceive it as darker/fuller because you are now hearing the low end properly as well. The low and mid content are the same going by ear, there's no additional bass, at least none than I can perceive. And that's not really something I'd want anyway as I play short scale basses which tent to be more rounded in the lows than longer scale basses. It was just the high end clarity that was missing, like turning down a passive tone control. However... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.