Laney Nexus tube all valve 400w full rig with 4x10 and 1x15 cabs and thick protective covers £795 Leyland Lancashire

[la bam]

Unfortunately a new kitchen (of all things!) forces sale.

 

A true true beast - 400w nexus tube all valve head. This runs as 3 amps - 1. FET solid state only.

2. All valve only.

3. Mixture of the 2.

Very unique and adaptable.

 

So many sounds available and quite manageable due to the top handles.

 

Comes with the superb laney nexus 4x10 and 1x15 for an adaptable power house of a rig. Use just the 4x10, just the 1x15 or both! The amp head has 8,4,2 ohm inputs so easy to do.

 

Also comes with a foot switch.

 

In really really good condition. Runs superb.

 

Comes with what i can only describe as well over the top protective covers. Thick, padded, waterproof faux leather. These leave the amp handles free, so easy to transport and fully wrap the cabs.

 

Probably £3000 worth of gear here when new.

 

Just for clarity theres a small piece of velcro on the head, and a small mark (both pictured).

 

Pick up Leyland Lancashire.

[la bam]

[Oldman]

What a behemoth of a rig GLWTS

[binky_bass]

I'd be quite tempted to try this rig out but you're a bit far away! As I understand this runs 8 KT88 valves (correct me if I'm wrong!) and is comparable to the Mesa Strategy head. 

 

Do you know the weight of the head and each cab?

[la bam]

6 minutes ago, binky_bass said:

I'd be quite tempted to try this rig out but you're a bit far away! As I understand this runs 8 KT88 valves (correct me if I'm wrong!) and is comparable to the Mesa Strategy head. 

 

Do you know the weight of the head and each cab?

 

The beauty is you wont be disappointed as its SO versatile.

 

Basically 3 amps in 1, with all kinds of extra eq, drive, compression, deep, presence, etc.

 

I'll see if I can find the weight specs. 

[la bam]

Head specs

 

THE ULTIMATE IN TUBE BASS TONE
The NEXUS-TUBE delivers 400W tube power, coupled with FET and TUBE preamp stages and comprehensive tone shaping it sets the benchmark for bass amps. No less than 8 x KT88 tubes and two oversized toroidal transformers sit in the engine room of the impressive power stage. The high-tech preamp is packed with tonal options: Select and blend both FET and TUBE input paths; Switch in Parametric and/or Graphic Mid shaping; Dial in studio quality compression from a single control. Whether you need clean, fast attack or valve-soaked warmth it is all at your fingertips.

THE ULTIMATE IN TUBE BASS TONE
The NEXUS-TUBE delivers 400W tube power, coupled with FET and TUBE preamp stages and comprehensive tone shaping it sets the benchmark for bass amps. No less than 8 x KT88 tubes and two oversized toroidal transformers sit in the engine room of the impressive power stage. The high-tech preamp is packed with tonal options: Select and blend both FET and TUBE input paths; Switch in Parametric and/or Graphic Mid shaping; Dial in studio quality compression from a single control. Whether you need clean, fast attack or valve-soaked warmth it is all at your fingertips.

#NEXUSTUBE #NEXUS

DETAILS
FX loops are important as they allow you to add effects to the signal path in a specific place between the pre-amp and the output section on an amplifier. This is where FX loops are important as it allows you to put time-based FX after the distorted pre-amp section. For example, delayed distortion sounds different to distorted delay – try it.

6 band Graphic EQ

Hi & Lo Para Mid

KEY FEATURES
Tube loaded, 3x ECC83 & 1x 12BH7 Preamp tube, 8 x KT88 Output section
All TUBE
Tuner out
FS5 footswitch supplied
Pro DI - selectable Pre, Post or Output
3 x Twist connectors 2, 4, and 8 ohms
Power amp in jack
Pre-amp out jack
Hi & Lo Para Mid
Bass & Treble shelving controls,
Class A/B
FET & Tube channels
Compressor
400 Watts
6 band Graphic EQ

 

34.5kg

[binky_bass]

Sadly, I think you're a bit too far away from me down in Essex! 

[la bam]

Nx115 cab specs

 

Baffle: Marine Grade Plywood
Cabinet Design: Marine Grade plywood cabinet with large grip handles, and kick proof metal grille
Castors: No
Packed Dimensions (HxWxD mm): 678 x 766 x 526
Drivers: 1x 15" Custom Celestion Neodymium
Frequency Response: 38Hz to 3.5KHz
Impedance: 8 ohms
Inputs: 2x Speakon/Jack combi socket
Kick Proof Metal Grill: Yes
Ports: Front
Power: 400 Watts (8 ohms)
Sensitivity: 95dB @ 1 watt / 1 metre
20 Kg Unit
Unit Dims - for int. case (HxWxD mm): 538 x 643 x 403

 

Weight 20kg

[la bam]

Nx410 specs

 

Baffle: Marine Grade Plywood

Cabinet Design: Marine Grade plywood cabinet with large grip handles, and kick proof metal grille

Castors: No

Packed Dimensions (HxWxD mm): 813 x 766 x 526

Drivers: 4x 10" Custom Celestion Neodymium

Frequency Response: 50Hz to 15KHz

Impedance: 8 ohms

Inputs: 2x Speakon/Jack combi socket

Kick Proof Metal Grill: Yes

Ports: Front

Power: 800 Watts (8 ohms)

Sensitivity: 100dB @ 1 watt / 1 metre

Weight: 27.5 Kg Unit

Unit Dims - for int. case (HxWxD mm) 643 x 643 x 403

 

 

Weight 27.5kg

[stewblack]

What a rig!

[la bam]

All for the price of your average class d head....

[spyder]

Oh my god.

My all time favourite valve bass head.

The head is worth the asking price alone.

Torquay is just to far away.

 

[binky_bass]

@la bam, realistically is there a way to work something out distance wise if i threw my hat in the ring? 

[MattW]

Christ that's a lovely rig.  I don't need it but I want it!!  @binky_bass we'll have to get it down to Essex on some sort of time share arrangement 🤣

[stewblack]

12 hours ago, MattW said:

Christ that's a lovely rig.  I don't need it but I want it!!  @binky_bass we'll have to get it down to Essex on some sort of time share arrangement 🤣

Stopping off in Somerset too please

[three]

Wow, that's immense - I've just seen some of the demos and it's a do all rig and (IMO) an incredible price.  A British built valve amp too!

[la bam]

Head now sold.

Cabs still available.

 

410 - £295.

115 - £195.