PaulThePlug Posted November 28, 2021 Author Share Posted November 28, 2021 Thanks, change from black, n the cream i used on the P... Original got the white covers with the thought about painting the body with them in... but then that would hide the slanty pickups a bit, so keeping plain white to make more of a feature and will look better when the white thumb rest arrives. Only got an Ibby GSR 200 with Reverse P n J... but the Jazz Body alone adds so much meat even unplugged... only tried it for a bit with headphones on the Zoom... Possibly more of a styling exercise... Need to find some time to get the 'lil Marshall MB30 practice amp going! Shame about the buzz... I'll leave it all to settle and see what can be done. Maybe a bit more relief may help, dont want to mess with the nut, so 1st fret might be were i look first. Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted December 3, 2021 Author Share Posted December 3, 2021 (edited) Had a go to sort the buzz... Took a needle file to the 1st fret... then 400 down to 3000 grit, 0000 wire wool then Autosolve Polish... no fret files or crowning tools here!. It's a bit better... some buzz when plucked hard... don't really want to take the 1st fret any lower or might start buzzing on the 2nd... I think the nut might be a little low so kinda split the difference... Don't want to add any more relief... and cause buzz higher up the fretboard. Neck ended up being about £15ish instead of £50ish as i got a partial refund as the neck wasnt gliss finished as adverised and the side fret markers at 9 had been double drilled, plugged and redrilled, and markers at 12 drilled, plugged and double drilled... Edited December 3, 2021 by PaulThePlug 1 Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted January 20, 2022 Author Share Posted January 20, 2022 (edited) Weather is still cold n wet... and now with a recent broken ankle... Bad Trip?.. Oh! The Irony... looks like it's gonna be about April untill the finish on this, and the ankle gets sorted... Oh well, at least i can put the near Week-Long 'Morphine Delirium' down as reasurch... Edited January 20, 2022 by PaulThePlug 2 Quote Link to comment Share on other sites More sharing options...
Jus Lukin Posted January 20, 2022 Share Posted January 20, 2022 (edited) - Edited March 16, 2022 by Jus Lukin 1 Quote Link to comment Share on other sites More sharing options...
stereoplayer Posted January 20, 2022 Share Posted January 20, 2022 (edited) 28 minutes ago, PaulThePlug said: Weather is still cold n wet... and now with a recent broken ankle... Bad Trip?.. Oh! The Irony... looks like it's gonna be about April untill the finish on this, and the ankle gets sorted... Oh well, at least i can put the near Week-Long 'Morphine Delirium' down as reasurch... ouch! Edited January 20, 2022 by stereoplayer Quote Link to comment Share on other sites More sharing options...
Velarian Posted January 20, 2022 Share Posted January 20, 2022 I was wondering how you were getting on, both bass and injury-wise. Best wishes for a speedy recovery and hopefully warmer weather won’t be too far away. I seem recall a few years ago we had a cracking week one March where the temperature was pushing mid-twenties celsius. It would be nice to repeat that. Wishful thinking I know, but I like to live in hope. 😊 Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted January 21, 2022 Share Posted January 21, 2022 Sorry to hear. Get well soon. Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted June 12, 2022 Author Share Posted June 12, 2022 (edited) Dip Disaster! Had another go yesters now the weather has warmed up... Dustbin full of water... Paint, Swirl, Dunk! Started off OK... then the paint kinda thinned out... Think there was not enough surface area and therefore paint area on the top of the water in the dustbin to cover the whole body as it got dunnked... Cost of getting a bigger vessel, more paint and trying again, i think i'm gonna sand off to bare wood and go Danish like the P, or go Beeswax... and back to the black pup covers... Oh well was a good idea, but best left to the experts... another one of those things that those that know their onions make look so easy... Edited June 12, 2022 by PaulThePlug 2 Quote Link to comment Share on other sites More sharing options...
stereoplayer Posted June 12, 2022 Share Posted June 12, 2022 2 hours ago, PaulThePlug said: Dip Disaster! Had another go yesters now the weather has warmed up... Dustbin full of water... Paint, Swirl, Dunk! Started off OK... then the paint kinda thinned out... Think there was not enough surface area and therefore paint area on the top of the water in the dustbin to cover the whole body as it got dunnked... Cost of getting a bigger vessel, more paint and trying again, i think i'm gonna sand off to bare wood and go Danish like the P, or go Beeswax... and back to the black pup covers... Oh well was a good idea, but best left to the experts... another one of those things that those that know their onions make look so easy... It’s pretty cool as is! Nicer with the hardware on I bet! 1 1 Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted June 12, 2022 Share Posted June 12, 2022 It doesn't look that bad from here. 1 1 Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted June 12, 2022 Author Share Posted June 12, 2022 (edited) Nope... It's bad... the paint skinned and snotted... If the back was the front i'd of thought about a light sand and clear coat... but I'd never be happy... so it's au natural n woody... Edited June 12, 2022 by PaulThePlug Quote Link to comment Share on other sites More sharing options...
SpondonBassed Posted June 12, 2022 Share Posted June 12, 2022 Skin and snot. I understand your point of view now. 1 Quote Link to comment Share on other sites More sharing options...
Simon. Posted June 13, 2022 Share Posted June 13, 2022 I like the back, but if it's formed a skin, it's probably not worth trying to save. Good effort, though! 👍 Not as random as you were attempting, but I always thought the pendulum painting process could be very effective on a bass, especially given the contours of the body and non-regular outline. Something like this (apologies for the terrible music...): 3 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.57725e0d56fc5d86f53e9e8d401d64f2.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.