Lozz196 Posted January 15, 2022 Share Posted January 15, 2022 (edited) So my pedalboard is: TC Polytune Tuner (9v) TC Spark Booster (9v) Aguilar Tonehammer (18v) Is there an easy way to just have one PSU cable going to the board or am I going to have to accept it’s two, one for the Aggie and one for the two TCs? Wondering if one of these would do the job: https://www.guitar.co.uk/ernie-ball-volt-power-supply?gclid=CjwKCAiA_omPBhBBEiwAcg7smTcq6I86_FmDUM1yEjDSzndYVC5D4JSPLpgu9c0iLvPlD4gmOx-dMBoCFZgQAvD_BwE Edited January 15, 2022 by Lozz196 Quote Link to comment Share on other sites More sharing options...
LeftyJ Posted January 15, 2022 Share Posted January 15, 2022 Yes, that Ernie Ball will do what you want. It's plenty powerful for all three pedals on your board. Since it's powered by an external AC adapter, it probably won't have fully separate outputs. But that won't be a problem with the type of pedals you have, especially if they're all in front of an amp. 1 Quote Link to comment Share on other sites More sharing options...
lemmywinks Posted January 15, 2022 Share Posted January 15, 2022 Or any regular power supply with an 18v Y cable: https://www.andertons.co.uk/guitar-dept/guitar-pedals/pedal-power-supplies/voodoo-labs-18v-y-cable-for-combining-outputs-on-pedal-power (cheaper options exist btw) Quote Link to comment Share on other sites More sharing options...
LeftyJ Posted January 16, 2022 Share Posted January 16, 2022 30 minutes ago, lemmywinks said: Or any regular power supply with an 18v Y cable: https://www.andertons.co.uk/guitar-dept/guitar-pedals/pedal-power-supplies/voodoo-labs-18v-y-cable-for-combining-outputs-on-pedal-power (cheaper options exist btw) Not quite any power supply. Only one with truly isolated outputs, or you'll just end up shorting the circuit and likely frying the unit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.