Supernaut Posted January 18, 2022 Share Posted January 18, 2022 Are the volume knobs supposed to be flush with the control plate? Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted January 18, 2022 Share Posted January 18, 2022 They were on the ones I had, but on one I replaced the loom and the shafts on the pots were longer so they sat a few mill proud. Quote Link to comment Share on other sites More sharing options...
Delberthot Posted January 18, 2022 Share Posted January 18, 2022 Any time I've changed knobs I always pull them up a bit so they clear the scratchplate. Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted January 18, 2022 Share Posted January 18, 2022 I’ve just looked and mine are factory set really close Quote Link to comment Share on other sites More sharing options...
nilebodgers Posted January 18, 2022 Share Posted January 18, 2022 Yes - flush. Some of the aftermarket wiring looms don’t use the short bush length (6mm) pots though and the knob skirt ends up with a gap under it. 1 Quote Link to comment Share on other sites More sharing options...
Supernaut Posted January 19, 2022 Author Share Posted January 19, 2022 Thanks guys. I took the knobs off to realign the position markers but couldn't remember if the volume knobs were supposed to be almost level with the control plate. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.