bobbajobb Posted January 25, 2022 Posted January 25, 2022 Hi! Upgrading my bass with aguilar pickups and preamp. Settled on this: https://www.muziker.co.uk/aguilar-obp-3sk-pp Reasoning for this one in particular is I only have 3 knobs on my bass However I've just found out it doesn't come with pots, and I have no clue where to start in terms of what pots I'd need. Sounds like I'll need 3, and one needs to be push/pull. What resistances should I get? Any recommended sites? Appreciate any advice, other things to take into account etc Quote
bloke_zero Posted January 25, 2022 Posted January 25, 2022 On the aguilar site they say: Quote OBP-3SK: Includes stacked Treble/Bass pot, Mid pot, and black mini-toggle switch for Midrange frequency selection https://www.aguilaramp.com/pickup-series/obp-preamps/ So I think the OBP is just the PRE but you've got the OBP-3SK kit which includes the pots? Quote
fleabag Posted January 25, 2022 Posted January 25, 2022 1 hour ago, bobbajobb said: Hi! Upgrading my bass with aguilar pickups and preamp. Settled on this: https://www.muziker.co.uk/aguilar-obp-3sk-pp Copied from your link Includes stacked Treble/Bass pot and separate Mid pot. Mid pot is push/pull for Midrange frequency selection Bass control: plus/minus 18 dB @ 40 Hz Mid control: plus/minus 16 dB @ 400 Hz or 800 Hz. User selectable frequency center Treble control: plus/minus 16 dB @ 6,5 KHz Input impedance: 1 meg ohm Output impedance: 100 ohm 9 or 18 volts operation Distortion: .019 into 10k ohm load Noise: -95 dBm unweighted Battery life: 324 hours Wire lead length: 16,50 cm Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.