Jump to content
Why become a member? ×

FRFR Setup - Alto TS310 Active Speaker and Sonicake Boom Ave Preamp £185 delivered! - *SOLD*
£200
Lowestoft


carlsim
 Share

Recommended Posts

Hi all... due to recently acquiring a combo I have been after for some time, I am putting up for sale my - in some respects - beginners foray in the FRFR world. It's a great little setup but my needs have changed and to be honest, this has hardly been used.

 

Essentially an active speaker with a nice little preamp pedal, this probably isn't best suited for a backline only situation unless it's a smaller gig (it is surprising how much volume these speakers put out) but it is a great and small solution if you are going into a PA and just need some monitoring. 

So - ALTO TS310 - 2000-WATT 10-INCH 2-WAY POWERED LOUDSPEAKER. (no box, but does come with the power cable. A few scuffs and marks on the case but in excellent working order. I bought this just before CV hit and was used in this setting twice - it worked great as a bass amp and i also routed some vocals into it as well - worked a treat! Bought new for £300 - looking for £170 if separate.

Specs: 

2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)

10-inch (254 mm) LF driver, 2.5-inch (65 mm) high-temperature voice coil

HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision waveguide

High quality, lightweight, cabinet design for easy transport, set up and installation

Pole-mountable, wedge monitor, bracket installation or flown application with integral M0 suspension points

Integrated 2-channel mixer with dual XLR 1/4-inch combo mic/line inputs, independent level controls, XLR Link output, Contour EQ switch and Ground-Lift switch

Custom-engineered high-efficiency class D amplifiers with passive cooling design – no fan means the speaker runs cleaner, quieter and has greater long-term reliability

Designed and tuned in the USA

 

SONICAKE BOOM AVE. PREAMP. No box but comes with the PSU and I made a battery pack for this to run off 6AA batteries. £40 if the speaker sells first.

One-Stop Gig Solution for Bass Players with Main Effects needed.

●Analog Preamp with 3-Band EQ recreates the Legendary Ampeg Style Tone, from Dynamic Clean to Classic Rock Bass Sound.

●Compressor, Boost, Fuzz Modules ready for Most Common Use in Bass Playing Scenes.

●Octave Module Produces Notes One and Two Octaves Lower along with the Direct Signal for the Massive Thickness or Treble Tricky with some High Frets Tracking.

●XLR Output for directly connecting to PA, Mixer or Audio Interface;  FX Loop for Hooking up other Effects.

Specifications:
Power: 9V DC center negative(included)
Current Consumption:60mA
Dimension: 262mm(D)×64mm(W)×44mm(H)
Weight: 500g

 

Happy to post and have a box ready to go - would sell the speaker separately but would prefer them to go together. Postage should be £15 to UK. 

alto 1.jpg

alto 2.jpg

alto 3.jpg

boom.jpg

Edited by carlsim
Link to comment
Share on other sites

  • 2 weeks later...
  • carlsim changed the title to FRFR Setup - Alto SOLD
Guest
This topic is now closed to further replies.
 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...