Thunderbird Posted April 4, 2022 Share Posted April 4, 2022 Hi guys my preamp has an effects loop in it and I'm wondering what pedals to put into the preamp effect loop I'm using the pedals connected normally and the moment I have tuner-compressor-2 fuzz pedals-preamp then a noise gate and finally a chorus pedal going into my ashdown heads effect loop Quote Link to comment Share on other sites More sharing options...
Bunion Posted April 4, 2022 Share Posted April 4, 2022 Usually you put the modulation pedals in the FX Loop so chorus, reverb, delay etc. This is so the pedal is untouched by your preamp and sounds cleaner and more precise in what’s it meant to do to you sound(as it was designed.) The fx loop is after the preamp but before the power amp so putting boosts in there can overdrive the amp Also a lot of loops run at line level not instrument level so if the pedal sounds like crap it’s not designed to run at line level. Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted April 4, 2022 Share Posted April 4, 2022 20 minutes ago, Bunion said: Usually you put the modulation pedals in the FX Loop... so the pedal is untouched by your preamp... The fx loop is after the preamp... Confused... Quote Link to comment Share on other sites More sharing options...
Bunion Posted April 4, 2022 Share Posted April 4, 2022 The fx loop is set between the preamp and the power amp so anything you plug into it won’t be coloured by the preamp settings Quote Link to comment Share on other sites More sharing options...
Thunderbird Posted April 4, 2022 Author Share Posted April 4, 2022 Thanks for the reply so if I wanted to put my fuzz pedals into the effects loop of the preamp pedal the fuzz pedals won't be affected by the preamp is that correct? Cheers Quote Link to comment Share on other sites More sharing options...
Bunion Posted April 4, 2022 Share Posted April 4, 2022 (edited) That’s correct but they will probably alter the volume (boost pedal) when you activate them unless you have a volume out on them because you won’t have the benefit of the preamp volume and gain controlling the sound. you may also find that they sound different due to the line level on most fx loops as opposed to instrument level Edited April 4, 2022 by Bunion 1 Quote Link to comment Share on other sites More sharing options...
Thunderbird Posted April 4, 2022 Author Share Posted April 4, 2022 Awesome thanks for the reply just the information I needed 👍 Quote Link to comment Share on other sites More sharing options...
Downunderwonder Posted April 6, 2022 Share Posted April 6, 2022 Most effects are much happier with guitar level signal. The amp fx loop is meant for line level units running off mains power. I have never had a problem running a pedal board right into the front of the amp where the bass would normally go straight in. The input gain usually winds up a bit lower. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.