fretmeister Posted April 9, 2022 Posted April 9, 2022 Anyone assembled one of them? I’m tempted to do one for a bit of fun. How much woodworking is needed to make it a half decent job? Quote
Guest Posted April 9, 2022 Posted April 9, 2022 (edited) A friend of mine recently built one, a guitar. It worked out pretty well and I have to say it sounds superb. I don't think much fettling of wood was involved. Edited April 9, 2022 by Bassfinger Quote
yorks5stringer Posted April 10, 2022 Posted April 10, 2022 (edited) If you like the paddle style headstock then there would be very little woodworking, however if you don't, get your files, blocks and saw out! Edited April 10, 2022 by yorks5stringer Quote
T-Bay Posted April 10, 2022 Posted April 10, 2022 I bought my father in law one. I was surprised at the quality. As long as you have a jigsaw or coping saw for the headstock you will be fine. Quote
xgsjx Posted April 10, 2022 Posted April 10, 2022 I looked at these before I got the Stingray. From the research that I did, they Got great reviews from owners. I was planning on doing a 5 string Jazz, but iirc, there’s only 4 string available. Quote
stewblack Posted April 11, 2022 Posted April 11, 2022 I remodelled a headstock with no special tools. Hacksaw, lots of sandpaper and patience. It's the painting would stymie me 1 Quote
fretmeister Posted April 11, 2022 Author Posted April 11, 2022 59 minutes ago, stewblack said: I remodelled a headstock with no special tools. Hacksaw, lots of sandpaper and patience. It's the painting would stymie me I was thinking the good old Halford's spray can approach to seal it and then cover it in stickers. Quote
yorks5stringer Posted April 11, 2022 Posted April 11, 2022 You leaving the body and neck bare wood then? If not there are plenty of options that don't need spraying but will provide some protection and you could use the same for the headstock. Plenty of info in the Repairs and Technical lounge.... Quote
rushbo Posted April 11, 2022 Posted April 11, 2022 Birchwood Casey Tru-Oil is a relatively painless way to finish a bass, as long as you're happy with the "natural" look. You can go from a nice satin to a really deep shine depending on your patience. I've done a few basses this way and I've always been pleased with the outcome. 1 Quote
PaulThePlug Posted April 11, 2022 Posted April 11, 2022 (edited) ^ or Screwfix No Nonsense Danish Oil @ £7... I used it on my P Bitsa https://www.screwfix.com/p/no-nonsense-danish-oil-clear-500ml/7393V? Edited April 11, 2022 by PaulThePlug Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.