Jump to content
Why become a member? ×

Alternative to an Ampeg 610


Smiles
 Share

Recommended Posts

Hi guys I’ve got an Ampeg itch that is proving difficult not to scratch but I know i may well regret hefting it around , the Ampeg would be an svt 610 , I just love the depth and thump of them .

Question is is there a light weight alternative that gives that depth of sound ideally a one cab but two light weight options would be considered

ive done a ton of research but as it’s so difficult these days finding a shop with any stock haven’t managed yet to try anything out

Thanks for any thoughts

Stu  

Link to comment
Share on other sites

Yep I think there meant to be nice sounding cabs but I think with the band set up ( 9 piece Ska band )  I would need two 212 cabs to get some height and to be able to hear it and I think the Ampeg 212’s are 4ohm and my ABM 600 couldn’t work with a 2ohm rig otherwise I would consider a 412 rig 

thanks again for thoughts 👍

Link to comment
Share on other sites

58 minutes ago, Smiles said:

Yep I think there meant to be nice sounding cabs but I think with the band set up ( 9 piece Ska band )  I would need two 212 cabs to get some height and to be able to hear it and I think the Ampeg 212’s are 4ohm and my ABM 600 couldn’t work with a 2ohm rig otherwise I would consider a 412 rig 

thanks again for thoughts 👍

Some years back one of our very own Basschatters made me a splitter box which enabled me to connect two 4ohm cabs up to an amp that was 4ohms, could be worth looking into. I get where you’re coming from though, and two of the SVT212s would be over 120lbs to carry, so no longer a lightweight set up. I’ve used one with my ABM600 and when it was stood on a flight case it was fine, but that was in a 3-piece so nothing else going on over my side of the stage/getting in the way.

Link to comment
Share on other sites

15 minutes ago, Lozz196 said:

Some years back one of our very own Basschatters made me a splitter box which enabled me to connect two 4ohm cabs up to an amp that was 4ohms, could be worth looking into. I get where you’re coming from though, and two of the SVT212s would be over 120lbs to carry, so no longer a lightweight set up. I’ve used one with my ABM600 and when it was stood on a flight case it was fine, but that was in a 3-piece so nothing else going on over my side of the stage/getting in the way.

Thanks Lozz really appreciate your input 👍

Link to comment
Share on other sites

16 minutes ago, NAS Bass said:

Bergantino NV cabs - 610, 412 or the 215. The 215 really does have depth and thump!

 

Thanks Nas yep heard a lot of good things re Bergantino gear certainly would be worth trying out , I think the Bass direct place stocks their gear so worth me popping up to them to have a look 

Appreciate your thoughts thanks 

Stu 

  • Like 1
Link to comment
Share on other sites

I run my ABM600 into a single SVT212AV cab in a loud rock band 

 

Trust me you will only need one cab as they are very loud and easily heard 

 

Best cab I’ve used and as good as my old Ampeg 610 without the weight 

 

Superb Cab and pairs really well with the Ashdown 

Link to comment
Share on other sites

10 hours ago, BassAdder27 said:

I run my ABM600 into a single SVT212AV cab in a loud rock band 

 

Trust me you will only need one cab as they are very loud and easily heard 

 

Best cab I’ve used and as good as my old Ampeg 610 without the weight 

 

Superb Cab and pairs really well with the Ashdown 

Thanks BassAdder appreciate your reply certainly well worth me looking into 

stu 

Link to comment
Share on other sites

35 minutes ago, Smiles said:

Thanks BassAdder appreciate your reply certainly well worth me looking into 

stu 

Trust me you will be impressed how good they sound especially when pushed !

Very full sounding and punchy cab that works well on its own in a band 

Link to comment
Share on other sites

On 15/04/2022 at 11:22, Sparky Mark said:

The SVT212AV uses ceramic speakers. I know the experts confirm that there is no reason ceramics should sound any different to neos but in my experience my ceramic loaded cabs have a more authoritative low end than my neo cabs. 

I think you'll find what the experts are saying is that there is no reason for them to sound different. Neo or Ceramic they are just magnets and you can shape the magnetic field how you want at the design stage. 

 

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...