Maude Posted April 23, 2022 Author Share Posted April 23, 2022 2 hours ago, LukeFRC said: If it helps - for the money that looks great as you got it This is completely true, and why I'm not overly worried. I'd hoped it might've just been a quick clean and polish and it would be like new(ish) again, but you can't win 'em all. For the money I've done alright. The other good thing is that although I really don't need another project right now, it's kind of forced my arm, and now I don't need to feel bad about ripping a perfectly good BEX4 apart and doing something different. It'll all come good in the end. 🙂 Quote Link to comment Share on other sites More sharing options...
Maude Posted April 23, 2022 Author Share Posted April 23, 2022 5 hours ago, mcnach said: Very nice, despite the signs of cosmetic wear! I only found out about this one after you already had expressed an interest, otherwise I would have gone to check it out in person myself! But it's ok, I don't *need* another bass. Yeah cos I 'need' another bass, just like I 'need' another project! 😂😂 1 Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted April 23, 2022 Share Posted April 23, 2022 (edited) I like a natural Danish oil or Wax finish... Hows the neck, has that had a rub? Edited April 23, 2022 by PaulThePlug Quote Link to comment Share on other sites More sharing options...
Maude Posted April 23, 2022 Author Share Posted April 23, 2022 1 hour ago, PaulThePlug said: I like a natural Danish oil or Wax finish... Hows the neck, has that had a rub? It does look nice just natural, emphasises the f holes and hardware in a really nice way. But hot pink sparkle would be cool too. 😁 Not made a start on the the neck yet. There'll be no problems there though. Just take all the finish off and then oil/wax or lacquer it. Or paint it hot pink sparkle 😂. The headstock face isn't scratched enough to be a problem either, just wet flat then re-laquer... Or paint it hot pink sparkle 🤣🤣🤣. Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted April 23, 2022 Share Posted April 23, 2022 mmm Bass 'n Matching Eye Shadow n Hot Pants... Classy! 2 Quote Link to comment Share on other sites More sharing options...
alyctes Posted April 23, 2022 Share Posted April 23, 2022 (edited) I have a defretted one. My favourite 4-string. (Well, reboarded actually. By someone in Brighton, when philw owned it.) Edited April 23, 2022 by alyctes 2 Quote Link to comment Share on other sites More sharing options...
ezbass Posted April 23, 2022 Share Posted April 23, 2022 Purple. That is all. 2 Quote Link to comment Share on other sites More sharing options...
Maude Posted April 25, 2022 Author Share Posted April 25, 2022 And this, boys and girls, is why the sunburst finish was invented. The body is constructed with a pair of central blocks, a pair of side bouts, a top and bottom and a top and bottom veneer. Annoyingly the top is even two piece, joined sideways rather than longways through the bridge area. So a natural or transparent top is now out of the question. It's rather plain anyway without the flame veneer. You can see the top join running down the centre of this picture. Still got the bridge area to carefully sand as the bridge is screwed and glued. The back is veneer is quite nice, and thicker than the front one so is intact. The different blocks in the body construction. All of this means it will probably get a solid, coloured top and a transparent burst back and sides, fading to solid to hide the body joins. I've had a few ideas but I'm very aware that the BEX4 is quite a natural looking bass (like an acoustic) with no chrome bling to stand out from a dark colour. I really like how the features stand out in its now natural colour so I think it'll be a lighter colour front. The cogs are whirring but I'm almost settled on an idea, it won't be to everyone's taste though. Let's just say that Duesenburg and Gretsch seem to be doing a lot of what I like. 😁 I'll probably just get on with it and post a picture afterwards to save this post becoming like a build thread, as my NBD posts always seem to. 🙂👍 6 Quote Link to comment Share on other sites More sharing options...
andy67 Posted April 25, 2022 Share Posted April 25, 2022 Loving it! Keep posting the image updates please 1 Quote Link to comment Share on other sites More sharing options...
lee650 Posted April 25, 2022 Share Posted April 25, 2022 On 21/04/2022 at 20:51, Maude said: My stupid head is beginning whir. I bet it would look amazing in transparent black. 🙈 Or British racing Green!! 😉 1 Quote Link to comment Share on other sites More sharing options...
Jakester Posted April 25, 2022 Share Posted April 25, 2022 Could you not just apply another veneer to the top, a'la @Andyjr1515? 2 Quote Link to comment Share on other sites More sharing options...
Maude Posted April 25, 2022 Author Share Posted April 25, 2022 1 hour ago, Jakester said: Could you not just apply another veneer to the top, a'la @Andyjr1515? The thought did cross my mind but the binding, and particularly the bridge will cause problems. Ideally the bridge would need removing and I'm already in far deeper than I wanted tbh. The binding also really wants to go on after a veneer so the the top of the binding is level with the surface of the veneer. A veneer could be fitted but, in my mind at least, any workaround regarding the bridge and binding would be a slight bodge. I'm just as happy with a painted finish as a wood one so I'm not overly keen to create even more work that won't necessarily look right anyway. I'm pretty much set on a suitably distasteful colour scheme anyway now. 😁 1 Quote Link to comment Share on other sites More sharing options...
Maude Posted April 25, 2022 Author Share Posted April 25, 2022 8 hours ago, andy67 said: Loving it! Keep posting the image updates please Just a few then. I'm painfully aware that my NBD's tend to turn into rambling semi build diaries. Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted April 25, 2022 Share Posted April 25, 2022 1 hour ago, Jakester said: Could you not just apply another veneer to the top, a'la @Andyjr1515? If it wasn't for the bridge, that would be quite a viable alternative, running at a 6/10 difficulty level. The bridge puts it up to around a 18/10 difficulty Know any any artists, @Maude ? With a coloured trans finish, well applied inked grain put on before the colour could be made to look like any other grain... 1 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted April 25, 2022 Share Posted April 25, 2022 3 minutes ago, Maude said: I'm pretty much set on a suitably distasteful colour scheme anyway now How about combining the two - veneer AND distasteful colour scheme: 2 1 Quote Link to comment Share on other sites More sharing options...
Maude Posted April 25, 2022 Author Share Posted April 25, 2022 33 minutes ago, Andyjr1515 said: Know any any artists, @Maude ? With a coloured trans finish, well applied inked grain put on before the colour could be made to look like any other grain... The top is two pieces joined in an odd place, horizontally through the bridge area, so a trans finish would need to be fairly solid up to the join line. I think it would look odd. It's not a massively noticeable join but it's there all the same. I've considered other finishes that would disguise the top like the Fender paisley, or lace painting, but I'm pretty set on what's in my head right now. I'm just holding off buying what I need for a day or two in case I have an epiphany (or should that be Epiphone?). 1 Quote Link to comment Share on other sites More sharing options...
Maude Posted April 25, 2022 Author Share Posted April 25, 2022 40 minutes ago, Andyjr1515 said: How about combining the two - veneer AND distasteful colour scheme: Erm... well... that's er, nice? Couldn't decide which of Granny's sideboards to use so went for both. 🤭 1 1 Quote Link to comment Share on other sites More sharing options...
Richard R Posted April 25, 2022 Share Posted April 25, 2022 Following this with great interest and anticipation of the wild but ultimately very cool final finish. Does NBD now stand for New Build Diary? Quote Link to comment Share on other sites More sharing options...
Maude Posted April 25, 2022 Author Share Posted April 25, 2022 1 hour ago, Richard R said: Does NBD now stand for New Build Diary? I didnt want it to... but yeah. 😂 1 hour ago, Richard R said: Following this with great interest and anticipation of the wild but ultimately very cool final finish. It's not that wild, in fact it's quite traditional (with a twist). I've just ordered what I need. May as well just go with my gut. I'll mix up the paint at work this week. There'll be a mix of Sepia calligraphy ink, antique bronze paint, shell pink paint and coarse rose gold flake. Possibly gold tuners and knobs. 🙈 3 Quote Link to comment Share on other sites More sharing options...
Maude Posted April 28, 2022 Author Share Posted April 28, 2022 (edited) I had a little play earlier with colours and this will be the palatte. The sepia ink is just wiped on a scrap of wood and the flake is still in the bag so very dense but this will be it. Shell pink and sparkle for the front front, the bronze and sepia ink for the back and sides. Unsure on headstock yet but the black was too heavy with the chosen colours, and now the top edge is nice and crisp again. Either matching or aged natural. Unless I think of something else mad, like gold or copper leaf. 😁 New waterslide decal on its way. Edited April 29, 2022 by Maude 4 Quote Link to comment Share on other sites More sharing options...
Richard R Posted April 28, 2022 Share Posted April 28, 2022 Sepia ink for the headstock, same as that top left image? 1 Quote Link to comment Share on other sites More sharing options...
Maude Posted April 29, 2022 Author Share Posted April 29, 2022 8 hours ago, Richard R said: Sepia ink for the headstock, same as that top left image? Possibly. I'm probably going to do the back of the neck and headstock in the ink so was thinking a different colour for the front. I was going to do the neck pink but amount of layers that go on for a sparkle finish would mean quite a step to edge of the fretboard, which would feel and look odd. There is a way round that so it might get a sparkle finish but ink would be way way easy. We'll see after I've done the body. 1 Quote Link to comment Share on other sites More sharing options...
Maude Posted April 30, 2022 Author Share Posted April 30, 2022 Don't you just hate it when you prime something, and then think 'ooh that's a nice colour'! Red shades have notoriously bad coverage so I went with a red primer I had knocking around rather than the usual grey. It's more of a pastel maroon and I quite like it. It's a bit too much like a poor attempt at the Billy Sheehan Bex though so it'll still be sparkle pink. 2 Quote Link to comment Share on other sites More sharing options...
AndyTravis Posted April 30, 2022 Share Posted April 30, 2022 Ooh ello Quote Link to comment Share on other sites More sharing options...
Maude Posted April 30, 2022 Author Share Posted April 30, 2022 Does anyone know if the Gotoh GB707 tuners are a straight replacement for the Yamaha tuners? I could just find the Gotoh stats and measure the Yams but I'm feeling lazy tonight. 😉 These are the Yam's, These are the Gotohs. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.