bumnote Posted May 12, 2022 Share Posted May 12, 2022 This is a power supply for pedals giving 8x 9 volt supplies, and 2 x18volt., It is centre negative so should fit most pedals but always check. Its been unpacked but nevr used. My apologies I cant get all the items into the individual boxes so I will send them seperately but in the same parcel. Those folks in the factories must have nimble fingers. https://www.jimdunlop.com/mxr-dc-brick-power-supply/ M237 DC BRICK ™ POWER SUPPLY DESCRIPTION • Powers eight 9V pedals and two 18V pedals all at once without sacrificing signal integrity • Features 8 red LEDs to clearly indicate short-circuited pedals • Includes AC adapter and all necessary cables to connect pedals to the unit DIRECTIONS • Connect included AC adapter into the M237’s 18V IN jack. • Plug the AC adapter into a wall outlet; the blue power LED will light. • Connect up to eight pedals requiring 9V power to the eight 9V OUT jacks using the included barrel-to-barrel cables. • Connect up to two pedals requiring 18V power to the two 18V OUT jacks using the barrel- to-barrel cables. POWER The DC Brick Power Supply requires an 18V regulated power supply rated at 2000 mA, with 5.5mm x 2.1mm positive barrel, negative center plug. The included power adapter can utilize a wide range of wall power, from 100–240V at 47–63Hz. Comes with switchable US/Japan, UK, EU, and Australian plugs. CONNECTION NOTES • Included cables use industry standard 5.5mm x 2.1mm positive barrel, negative center polarity plugs. • Eight 9V outputs can handle an average of 150 mA each, or a total of 1200 mA in any configuration. • Two 18V outputs can handle an average of 400 mA each, or a total of 800 mA in any configuration. • All outputs may be used simultaneously for a total current output of up to 2000 mA. • The M237 is not compatible with positive ground pedals. Use of positive ground pedals may cause short circuiting. CONTROLS 18V IN receives power from 18V DC Adapter 9V OUT jacks power eight 9V pedals; RED LEDs indicate short-circuited pedals BLUE LED indicates whether the M237 is powered 18V OUT jacks power two 18V p Link to comment Share on other sites More sharing options...
bumnote Posted May 12, 2022 Author Share Posted May 12, 2022 Collect or Postage at cost Link to comment Share on other sites More sharing options...
bumnote Posted May 23, 2022 Author Share Posted May 23, 2022 SOLD Link to comment Share on other sites More sharing options...
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts