ped Posted June 13, 2022 Share Posted June 13, 2022 4 minutes ago, Reggaebass said: Is it kinda wedge shaped Yes, sort of radiuses with a strong falloff towards the treble side. My G is always super low anyway so it took some trial and error, and doesn't look very tidy but it works well! 1 Quote Link to comment Share on other sites More sharing options...
LeftyJ Posted June 13, 2022 Share Posted June 13, 2022 On 12/06/2022 at 01:24, drTStingray said: I use these when available - these are based on when Leo and co finally got it right on mutes!! That would be 1966, on the Mustang Bass On the first Jazz Basses of 1960-1962 was a predecessor of that system, but not yet adjustable: they just bend into place - and I suppose you could twist them away when you don't want to use them but that wasn't easy when you kept that huge bridge cover in place 1966 saw the introduction of this system on the Mustang Bass, which is adjustable with the set screws and works well: 1 1 Quote Link to comment Share on other sites More sharing options...
drTStingray Posted June 13, 2022 Share Posted June 13, 2022 (edited) 1 hour ago, LeftyJ said: That would be 1966, on the Mustang Bass On the first Jazz Basses of 1960-1962 was a predecessor of that system, but not yet adjustable: they just bend into place - and I suppose you could twist them away when you don't want to use them but that wasn't easy when you kept that huge bridge cover in place 1966 saw the introduction of this system on the Mustang Bass, which is adjustable with the set screws and works well: Yeah I was aware the Mustang had a similar design to the 1976 Musicman version - however I wasn’t sure whether the Mustang was under CBS and Leo had already gone - in which case it was reprised on the Stingray. Cue lots of debate……. you also need a screwdriver to activate them on a Mustang (thumb screw for easy application on a Stingray). I’ve even activated them between songs, live it’s that easy!! Whatever the answer, it’s a great system as you can vary the pressure of each individual mute - they sound great recorded on a Stingray - very very thumpy!! Edited June 13, 2022 by drTStingray 3 Quote Link to comment Share on other sites More sharing options...
MyNameIsMark Posted June 14, 2022 Share Posted June 14, 2022 I find the number of variables in mutes so frustrating! I've settled on NordyMutes & rather than fit it 'perpendicular' I angle the foam so it travels along the strings, pointing towards the nut. Also, sitting deeper on lower strings & barely touching on the higher. No mods needed, removable, reasonably easy to recreate, and about the best I've found for a not-overkill & consistent muting across the strings without too negative an impact on intonation. I can recommend experimenting with the "Danny Mo Morris" 2nd+3rd+4th fingers on fretting hand technique, and just a simple "immediately release the pressure to stop notes sustaining"... though it takes far more patience and practice to master than I have 😢 1 1 Quote Link to comment Share on other sites More sharing options...
Dan Dare Posted June 14, 2022 Share Posted June 14, 2022 A piece cut from one of these 1 Quote Link to comment Share on other sites More sharing options...
Saul Panzer Posted June 15, 2022 Share Posted June 15, 2022 17 hours ago, Dan Dare said: A piece cut from one of these This is also my go-to when I rarely use a mute, 6 for £1 at my local tesco last time I brought some. I just cut it at the curved indentation bit and use the scouring part for the dishes. 2 Quote Link to comment Share on other sites More sharing options...
Geek99 Posted June 15, 2022 Share Posted June 15, 2022 10 minutes ago, Saul Panzer said: This is also my go-to when I rarely use a mute, 6 for £1 at my local tesco last time I brought some. I just cut it at the curved indentation bit and use the scouring part for the dishes. 6 for £1 - you were robbed try b and m or home bargains Quote Link to comment Share on other sites More sharing options...
Saul Panzer Posted June 15, 2022 Share Posted June 15, 2022 54 minutes ago, Geek99 said: 6 for £1 - you were robbed try b and m or home bargains I'm out in the countryside, it's a 40 minute drive to my nearest B&M...that's another £10 for a bus or petrol costs these days. Anyway shop local and all that, gotta keep what few local stores I do have open. 1 Quote Link to comment Share on other sites More sharing options...
stewblack Posted June 16, 2022 Share Posted June 16, 2022 On 11/06/2022 at 13:35, Reggaebass said: I’m always messing around with various mutes, i like the sound and it suits some of tracks I play, I usually just put foam under the bridge which is ok but it can put the intonation out a touch so I’ve been making a few of my own, I had trouble keeping the slots square ,but I found my grandads old little square and with some masking tape it’s worked a treat. which ones are you using Well, having seen these I now want to make some! But I have a fret wrap coming from Thomann some time next week if that counts. 1 Quote Link to comment Share on other sites More sharing options...
thewebow Posted June 21, 2022 Share Posted June 21, 2022 Are those Hurley bridges available to buy after market? Interested to know how to get hold of one. I only play Used USA player series so don’t feel guilty about putting holes in one! Quote Link to comment Share on other sites More sharing options...
Skin Lewis Posted June 21, 2022 Share Posted June 21, 2022 37 minutes ago, thewebow said: Are those Hurley bridges available to buy after market? Interested to know how to get hold of one. I only play Used USA player series so don’t feel guilty about putting holes in one! It's separate from the bridge, it's this one from Allparts: https://www.allparts.uk.com/products/genuine-fender-62-jaguar-mute-assembly-kit?_pos=317&_sid=e21f7b17d&_ss=r 1 1 Quote Link to comment Share on other sites More sharing options...
deepbass5 Posted June 23, 2022 Share Posted June 23, 2022 (edited) Here is a Picture of my foam mute that has now gone back in my CS 62 P I had this cut months ago from some of that old grey foam and used it smooth side up but after our conversations about allowing the G string to sing a little more i put it in bobble side up this has allowed key strings to run between the valleys in the foam and sounds just right. Gigged it like this last Saturday and was great, so it stays 👍 Edited June 23, 2022 by deepbass5 1 Quote Link to comment Share on other sites More sharing options...
Bunion Posted June 23, 2022 Share Posted June 23, 2022 Bit of old foam I got from an upholstery job at work 1 Quote Link to comment Share on other sites More sharing options...
mcnach Posted June 24, 2022 Share Posted June 24, 2022 I wonder if these would do a good job. It's a pretty dense foam and you get a few out of a single eraser so you can have a few tries with different slot depth/widths etc. They come in all colours, including black. 1 Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted June 24, 2022 Author Share Posted June 24, 2022 21 minutes ago, mcnach said: I wonder if these would do a good job. It's a pretty dense foam and you get a few out of a single eraser so you can have a few tries with different slot depth/widths etc. They come in all colours, including black. Thanks mcnach, they look like they would work well, I still just push a bit of foam under the strings sometimes but it’s really good fun just trying these different things 1 Quote Link to comment Share on other sites More sharing options...
deepbass5 Posted June 24, 2022 Share Posted June 24, 2022 I think you may find that it is too dense, and wont let the strings vibrate enough, the softer open pore wash bowl sponge is nearer the texture required. But down to taste in the end and will also depend on fingers or Pick. 1 Quote Link to comment Share on other sites More sharing options...
mcnach Posted June 24, 2022 Share Posted June 24, 2022 1 hour ago, deepbass5 said: I think you may find that it is too dense, and wont let the strings vibrate enough, the softer open pore wash bowl sponge is nearer the texture required. But down to taste in the end and will also depend on fingers or Pick. If you just make a cut for the strings yes, but the idea I got from seeing others is to cut a slot for each string with a different width, or maybe V-shaped so that you can find the amount of muting desired (that's the idea, how much trial and error it will take, I don't know... but I'll let you know as I just bought on of those to try. 1 Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted June 24, 2022 Author Share Posted June 24, 2022 Miss reggae bought this, she doesn’t know yet but it’s a good contender for the bassmute craft knife 😁 5 Quote Link to comment Share on other sites More sharing options...
thewebow Posted June 24, 2022 Share Posted June 24, 2022 Scott’s bass lesson recommend these particular ones: 1 Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted June 24, 2022 Author Share Posted June 24, 2022 2 minutes ago, thewebow said: Scott’s bass lesson recommend these particular ones: I’m gonna end up with a house full of sponges 😁 1 Quote Link to comment Share on other sites More sharing options...
Aidan63 Posted June 24, 2022 Share Posted June 24, 2022 those minky wipes have some chemical coating in/on them I think, if you get them wet they dry stiffer and don't return to original state i.e. they change properties just from contact with water. It could just be release agent from manufacture. I tried them a while ago and wouldn't recommend 1 Quote Link to comment Share on other sites More sharing options...
deepbass5 Posted June 24, 2022 Share Posted June 24, 2022 (edited) These Victoria sponges are really good Edited June 24, 2022 by deepbass5 2 5 Quote Link to comment Share on other sites More sharing options...
Reggaebass Posted June 24, 2022 Author Share Posted June 24, 2022 6 minutes ago, deepbass5 said: These Victoria sponges are really good Now you’re talking 😁👍 Quote Link to comment Share on other sites More sharing options...
thewebow Posted June 24, 2022 Share Posted June 24, 2022 2 hours ago, Aidan63 said: those minky wipes have some chemical coating in/on them I think, if you get them wet they dry stiffer and don't return to original state i.e. they change properties just from contact with water. It could just be release agent from manufacture. I tried them a while ago and wouldn't recommend To be fair I have not used them yet. Did they react with your varnish or did you just not like the dampening properties? Quote Link to comment Share on other sites More sharing options...
Aidan63 Posted June 24, 2022 Share Posted June 24, 2022 it was the becoming less flexible I didn't like, I didn't use it enough to damage the finish - I dropped it on a floor which was dusty so I washed it, left it to dry and found it had curled slightly, shrunk slightly and become less flexible. I tried it after watching a video where Scott SBL was chatting about muting materials and he 'raided' the cupboard under the kitchen sink to show what one could use that you had lying around Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.