Hartke hd112 vs Aguilar SL 112

[NancyJohnson]

  On 15/09/2022 at 14:12, nilorius said:

Maybe i am a bit stupid, but ther's one more question about HD112. If i use them with tone hammer 500, how much ohm is the right on bouth hd112 - 4 or 8 ?

Expand  

 

If you daisy-chain them from one output, it'll be 4ohms. 

 

The Tonehammer 500 has two outputs, I'm not sure how the head handles things if you took an output to each cabinet - so for instance, if you fed an 8ohm enclosure from each one does this load go down to 4ohms ('maximum load').  Don't know.

[Dood]

  On 15/09/2022 at 14:12, nilorius said:

Maybe i am a bit stupid, but ther's one more question about HD112. If i use them with tone hammer 500, how much ohm is the right on bouth hd112 - 4 or 8 ?

Expand  

 

Set each switch to 8 ohms when you daisy chain them and the resulting load at the amp will be 4 ohms.

[nilorius]

  On 15/09/2022 at 15:26, Dood said:

 

Set each switch to 8 ohms when you daisy chain them and the resulting load at the amp will be 4 ohms.

Expand  

Tone hammer500 has separate output for each cabinet so i guess it's not daisy chain.

[Dood]

  On 15/09/2022 at 16:02, nilorius said:

Tone hammer500 has separate output for each cabinet so i guess it's not daisy chain.

Expand  

 

The two outputs on the amplifier are wired together in parallel, it doesn't matter if you cable as a daisy chain or to each cabinet separately, the internal loading on the amplifier will still be the same  

[nilorius]

  On 15/09/2022 at 16:06, Dood said:

 

The two outputs on the amplifier are wired together in parallel, it doesn't matter if you cable as a daisy chain or to each cabinet separately, the internal loading on the amplifier will still be the same  

Expand  

Thanks! That was the way i did all the time, so i was right.

[neepheid]

I don't think this conversation would have been necessary if you'd done it wrong

[Dan Dare]

  On 15/09/2022 at 17:07, neepheid said:

I don't think this conversation would have been necessary if you'd done it wrong

Expand  

 

Indeed. The Aguilar owner's manual explains how to connect cabs (the one that came with my AG700 did, at any rate).