Jump to content
Why become a member? ×

What, in DrumChat's opinion, would be the Top 3 Attributes of a Bassist?


Munurmunuh

Recommended Posts

On 24/10/2022 at 21:55, Boodang said:

1. Turns up with a set of spare strings as opposed to the statement 'I've never broken a string yet!'...

 

I hope that's not a reference to my bassist!! 🤣

 

I play a lot of drums. I like a bassist who doesn't have too much low end in his sound. It's really quite common for bassists to think they need a big booming load of bass that fills the room and it's impossible to play with

  • Like 2
Link to comment
Share on other sites

4 minutes ago, cheddatom said:

I see a few bassists suggesting they're helping the drummer keep time. If you start trying to push or drag me I just play louder and stare at you

I've seen guitarist worship leaders who have accused more than one drummer of not keeping time when they themselves were the ones trying to speed up. They were not even aware of their own bad timing. It's called being a control freak in those circumstances.

Link to comment
Share on other sites

1 hour ago, cheddatom said:

I see a few bassists suggesting they're helping the drummer keep time. If you start trying to push or drag me I just play louder and stare at you

 

Everyone should be keeping time. It's not the drummers job to keep time for the band. 

 

Knowing when a bass player (or drummer) is pushing or pulling the beat (not speeding up or slowing down the time) is a good skill to learn.

 

 

Edited by TimR
Link to comment
Share on other sites

21 minutes ago, Dad3353 said:

 

... and loses his/her left hand in doing so. Loses right hand if recidivist.

 

No, seriously..! ¬¬

They are great drummers we have but they didn't know how to cut the port on a new drum kit the church bought. I own the tool that does the job so cut it for them and we refitted it before the service.

I am spoiled really as they are African drummers and would be very difficult to fault.

Their rhythms are fantastic and stretched me when I was first invited to become their bassist but they are fantastic guys and get on and get things done. Sorting out lighting rigs, Putting P A stuff out including sharing time on the digital mixer as well as mic up their own drums and setting up mics for singers etc

Come to think of it 🤔 are they really drummers at all 🤨

Link to comment
Share on other sites

3 minutes ago, Ralf1e said:

They are great drummers we have but they didn't know how to cut the port on a new drum kit the church bought. I own the tool that does the job so cut it for them and we refitted it before the service.

I am spoiled really as they are African drummers and would be very difficult to fault.

Their rhythms are fantastic and stretched me when I was first invited to become their bassist but they are fantastic guys and get on and get things done. Sorting out lighting rigs, Putting P A stuff out including sharing time on the digital mixer as well as mic up their own drums and setting up mics for singers etc

Come to think of it 🤔 are they really drummers at all 🤨

 

Does the drum need a port at all, though..? For a 'concert' kit (no resonant heads...), mics inside the shell had its place (if close-micing is the effect wanted...), but a well-placed bass-drum mic, or a boundary mic, give a splendid signal for the desk, retaining the character of the bass drum. If it's the batter head dynamic that's wanted, mic the batter side.
On the other hand if the drummer really wanted the sound of a ported drum, there are excellent heads with tuned ports on the market. To each their own, though. Does the floor tom get cut, too..? Why not..? -_-

Link to comment
Share on other sites

14 minutes ago, Dad3353 said:

 

Does the drum need a port at all, though..? For a 'concert' kit (no resonant heads...), mics inside the shell had its place (if close-micing is the effect wanted...), but a well-placed bass-drum mic, or a boundary mic, give a splendid signal for the desk, retaining the character of the bass drum. If it's the batter head dynamic that's wanted, mic the batter side.
On the other hand if the drummer really wanted the sound of a ported drum, there are excellent heads with tuned ports on the market. To each their own, though. Does the floor tom get cut, too..? Why not..? -_-

The bass drum having been cut has a clip on plastic port ( I think a Gibraltar one) put into it and has a bass drum specific mic into it recommended by the PMT tech guys. The floor tom is not cut and has a mic on the batter head as do all the other drums and the Congas and talking drum.

At this time they don't have their own separate inline mixer but with the amount of mics involved I think they will have to go there sooner or later. Its all still a learning curve for us all and I suppose it always will be.

Edited by Ralf1e
Link to comment
Share on other sites

1 hour ago, TimR said:

 

Everyone should be keeping time. It's not the drummers job to keep time for the band. 

 

Knowing when a bass player (or drummer) is pushing or pulling the beat (not speeding up or slowing down the time) is a good skill to learn.

 

 

 

I'm not talking about playing infront or behind the beat, I'm talking about other musicians trying to speed up (or slow down) the song against the drummers steady beat. I absolutely hate it when people do this. It sounds terrible, and it's patronising to the drummer. The worst is when they start stamping their foot on stage trying to indicate to the drummer that they should speed up. F OFF!!!!

  • Like 1
Link to comment
Share on other sites

34 minutes ago, cheddatom said:

 

I'm not talking about playing infront or behind the beat, I'm talking about other musicians trying to speed up (or slow down) the song against the drummers steady beat. I absolutely hate it when people do this. It sounds terrible, and it's patronising to the drummer. The worst is when they start stamping their foot on stage trying to indicate to the drummer that they should speed up. F OFF!!!!

 

Are you playing music with musicians or trying to run a factory production line? 

  • Confused 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...