Dave Posted April 21, 2009 Share Posted April 21, 2009 (edited) [b]Now asking £130 (including 12V power supply and Special Delivery postage).[/b] From the included "manual": [quote][b]DHA VT2 Twin Bass (overdrive and distortion pedal)[/b] Uses 2x ECC83 (12AX7) valves to generate classic pure valve tones. Has 2 separate valve driven pre-amps which can be selected as 1, 2 or 1+2 or bypass, thereby providing 4 selectable tone options, such as Clean, Blues, Crunch and Lead. Both channel 1 and 2 offer gain settings from fat, warm clean valve tone to rock crunch with Clipping and Boost options. There is a level 1 to 2 control so that you can set the amount of level that channel 1 drives into channel 2 (when 1+2 is selected). When 1+2 is selected there is a massive amount of gain as the output of channel 1 drives channel 2 producing great compressed valve sustain. There is a solid footswitch for true by-pass with an effect on LED. There are ¼” mono jacks in and out as well as an extra ¼” Stereo jack. The stereo output provides a stereo output from the pedal when it is in channel 1 or 2 mode with channel 1 and 2 going to the left and right stereo channels independently of which VT2 channel is selected. This option provides a way of setting 2 gain settings to 2 separate amplifiers or for recording in stereo. The mono output jack provides the selected signal path for your amp. The VT2 is intended to be used in front of a valve amplifier, but also works well with solid state amps or even recording set ups acting as a valve pre-amp. The VT2 has a built-in voltage doubler circuit which generates 24V from the existing 12V power supply (included). This serves to add more clean headroom, gain and output volume to the pedal. The VT2 is fitted with a 2.1mm external PSU adaptor for use with a 12V@500mA external supply but a supply of 1.2A or greater is recommended. Controls are Gain 1, Gain 2, Clip 1, Clip 2, Boost 1, Boost 2, Boost Level 1, Boost Level 2, Level 1, Level 2 and Level 1-2.[/quote] Looking for [b]£130[/b] for this which will include the 12V power supply and Special Delivery postage. If you don't want the power supply, then I can let it go for a little less. PayPal happily accepted. It's a great "little" pedal, and you can swap out the valves for any valve you like to produce a variety of different tones (I tried it with some Mullards and it sounded fab). The only reason I'm getting rid is I've now FINALLY found the distortion sound I've always been after (from a Marshall amp) and so this is now surplus to requirements. Any questions please don't hesitate to ask. Cheers for looking! Edited May 6, 2009 by Dave Link to comment Share on other sites More sharing options...
Dave Posted April 27, 2009 Author Share Posted April 27, 2009 Monday BUMP for price reduction! Link to comment Share on other sites More sharing options...
iamapirate Posted April 27, 2009 Share Posted April 27, 2009 (edited) 'well if I could I surely would' buy it :S:S:S argh! I want money. This is a good price for what looks like a very versatile Valve OD! EDIT have a free bump Edited April 27, 2009 by iamapirate Link to comment Share on other sites More sharing options...
thisnameistaken Posted April 27, 2009 Share Posted April 27, 2009 Clips? Looks interesting but I've never heard one of these. Link to comment Share on other sites More sharing options...
El_JimBob Posted April 28, 2009 Share Posted April 28, 2009 Looks like it might be 2 VT-1's side by side, with the option to run one into the other? I'm guessing DHA don't make this anymore, but it looks far more adaptable than the VT-2 Dual Bass. Consider me 'interested'.... Link to comment Share on other sites More sharing options...
Dave Posted April 29, 2009 Author Share Posted April 29, 2009 [quote name='El_JimBob' post='474204' date='Apr 28 2009, 02:03 PM']Consider me 'interested'....[/quote] As Mrs. Doyle would say "G'won g'won g'won g'won g'won g'won g'won!" I don't want to have to resort to Fleabay, and promise to donate £20 from this sale to the maintenance of this site. Link to comment Share on other sites More sharing options...
Happy Jack Posted May 6, 2009 Share Posted May 6, 2009 Now MINE!!! Just what I needed as a replacement for my VT3 rackmount - can't wait to hear this front-ending my Demeter preamp. Link to comment Share on other sites More sharing options...
Recommended Posts