Andyjr1515 Posted November 29, 2022 Author Share Posted November 29, 2022 6 minutes ago, Mottlefeeder said: Have you got room for a blob of hot melt glue to strengthen the joint or to anchor the cable to the pickup? David Trouble is, the fine wires are at the very end of the plate and the cable shielding is too stiff to double back in an S - it would probably do more harm than good. Now it's in, then it's probably OK. Maybe just something for the feedback to Gemini. Everything else is super - the look of them; the presentation (wrapped in purple felt!); the quality of the fixing screws. I look forward to seeing what they sound like. Quote Link to comment Share on other sites More sharing options...
tauzero Posted November 29, 2022 Share Posted November 29, 2022 7 hours ago, Andyjr1515 said: Trouble is, the fine wires are at the very end of the plate and the cable shielding is too stiff to double back in an S - it would probably do more harm than good. Now it's in, then it's probably OK. Maybe just something for the feedback to Gemini. Everything else is super - the look of them; the presentation (wrapped in purple felt!); the quality of the fixing screws. I look forward to seeing what they sound like. Could you put a cable tie round the cable, to stop it being pulled should anyone take the controls out and to ensure a bit of slack in the pickup cavity? 2 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted November 30, 2022 Author Share Posted November 30, 2022 16 hours ago, tauzero said: Could you put a cable tie round the cable, to stop it being pulled should anyone take the controls out and to ensure a bit of slack in the pickup cavity? Yes, I was thinking along the same lines that it needs some sort of tight grommet or similar - but a clipped off cable tie would be perfect. Consider your excellent idea stolen, @tauzero 2 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted November 30, 2022 Author Share Posted November 30, 2022 Today's time taken was sorting out the neck pickup chamber. Mainly: - shielding - pickup ring fixing where, underneath for three of the holes there was a void The original chambers were a combination of partial shielding plates and conductive paint. Where I have exposed new timber, I added copper foil, soldering across to the existing plates and checking that all three elements had full grounding continuity. The latter was a case of cutting and fitting shaped timber sections that would glue to the sides of the original chamber for the pickup ring screws to screw into: And double checking with the pickup that there weren't any obstructions, ready for adding the height foams and fixing screws: And that will be one of the jobs for tomorrow along with, hopefully, wiring it up. 9 Quote Link to comment Share on other sites More sharing options...
ped Posted November 30, 2022 Share Posted November 30, 2022 Fabulous! I hadn’t considered the screws that wouldn’t have any wood to bite into. That looks like a neat solution.so pleased the pickup covers the P cavity so closely though. It was a challenge finding a pickup that would! 3 Quote Link to comment Share on other sites More sharing options...
Pea Turgh Posted November 30, 2022 Share Posted November 30, 2022 1 hour ago, ped said: Fabulous! I hadn’t considered the screws that wouldn’t have any wood to bite into. That looks like a neat solution.so pleased the pickup covers the P cavity so closely though. It was a challenge finding a pickup that would! I love that neck pickup - looks like it was made that way. I will come to love the bridge pickup too - just not used to it yet I suppose. Bloody lovely project. 2 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted December 2, 2022 Author Share Posted December 2, 2022 And...it's done! What's more, it sounds wonderful Here it is before it gets back into @ped's clutches tomorrow: 25 Quote Link to comment Share on other sites More sharing options...
BigRedX Posted December 2, 2022 Share Posted December 2, 2022 Looks great as usual. I just had a quick scan through the thread to see what the controls do, and I couldn't see anything about pickup selection. IIRC the slide switch is a coil tap, so are the two knobs volumes for each pickup, or are they always both on? 2 Quote Link to comment Share on other sites More sharing options...
ped Posted December 2, 2022 Share Posted December 2, 2022 4 minutes ago, BigRedX said: Looks great as usual. I just had a quick scan through the thread to see what the controls do, and I couldn't see anything about pickup selection. IIRC the slide switch is a coil tap, so are the two knobs volumes for each pickup, or are they always both on? They used to be vol/vol but I changed them to balance and tone (with a nice paper in oil cap and a no-load setting when fully open). 1 Quote Link to comment Share on other sites More sharing options...
ped Posted December 2, 2022 Share Posted December 2, 2022 @Andyjr1515 what can I say - that looks superb. And all done in what, two weeks? Can't wait to see it in person and give it a whirl. 1 Quote Link to comment Share on other sites More sharing options...
ped Posted December 2, 2022 Share Posted December 2, 2022 Also, I have the same lamp as you. Hang on, is that my dining room? 3 Quote Link to comment Share on other sites More sharing options...
bartelby Posted December 2, 2022 Share Posted December 2, 2022 That looks really nice!! Top work as usual @Andyjr1515 1 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted December 2, 2022 Author Share Posted December 2, 2022 1 hour ago, ped said: Also, I have the same lamp as you. Hang on, is that my dining room? Yes Haven't you noticed the sawdust when you come in from work? 4 Quote Link to comment Share on other sites More sharing options...
ped Posted December 3, 2022 Share Posted December 3, 2022 It’s even better than I hoped. Just had 10 mins with it and it’s perfect. More later! Of course huge thanks to Andy for his simply fantastic work 18 Quote Link to comment Share on other sites More sharing options...
ped Posted December 3, 2022 Share Posted December 3, 2022 I will have time to properly play it tonight but so far it's the same as before but more balanced, more grunt and of course everything is straight! The addition of the splittable humbucker in the neck gives so many options. In humbucker mode it sounds pretty much the same as the P pickup did, something I've always quite liked about Tbird pickups which don't get enough love IMO. The bridge is a lot more balanced volume wise with the neck, it does a beautiful parpy sound with tons of fundamental, and mixed with the front it gives a sweet 60s jazz with flats sound. Split the front and balance 50/50 and it opens up a bit more towards a 70s spacing sound with a really woody growl. So happy with this thing. 7 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted December 3, 2022 Author Share Posted December 3, 2022 12 minutes ago, ped said: I will have time to properly play it tonight but so far it's the same as before but more balanced, more grunt and of course everything is straight! The addition of the splittable humbucker in the neck gives so many options. In humbucker mode it sounds pretty much the same as the P pickup did, something I've always quite liked about Tbird pickups which don't get enough love IMO. The bridge is a lot more balanced volume wise with the neck, it does a beautiful parpy sound with tons of fundamental, and mixed with the front it gives a sweet 60s jazz with flats sound. Split the front and balance 50/50 and it opens up a bit more towards a 70s spacing sound with a really woody growl. So happy with this thing. I'm delighted. The moment I plugged it in, even on my rubbish home system, I knew it was going to be 'rather special' 1 Quote Link to comment Share on other sites More sharing options...
ped Posted December 3, 2022 Share Posted December 3, 2022 Fred loves it too! 12 Quote Link to comment Share on other sites More sharing options...
Hellzero Posted December 3, 2022 Share Posted December 3, 2022 If you front the rear with back at the front left and mix them using the lateral switch towards the back does it pick up the strings well? 2 Quote Link to comment Share on other sites More sharing options...
ped Posted December 11, 2022 Share Posted December 11, 2022 Finally got round to doing a video of this bass, apologies for sloppy playing etc but I really wanted to show some of the sounds! 17 Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted December 13, 2022 Author Share Posted December 13, 2022 On 11/12/2022 at 17:13, ped said: Finally got round to doing a video of this bass, apologies for sloppy playing etc but I really wanted to show some of the sounds! Been in Aberdeen the last few days with only an old Android Tablet with me - really no good for listening to bass on! After an 'interesting' hike back yesterday, I've been able to listen to this through a decent speaker. It sounds GREAT! Nice playing too (but don't tell @ped - it'll only go to his head ) 2 Quote Link to comment Share on other sites More sharing options...
Hellzero Posted December 13, 2022 Share Posted December 13, 2022 Strangely @ped there is a Mick Karn vibe in your sound when there's 80% balance of the rear (I still don't know which pickup you mean) and 30% tone, and I love it. 1 Quote Link to comment Share on other sites More sharing options...
ped Posted December 13, 2022 Share Posted December 13, 2022 12 hours ago, Andyjr1515 said: Been in Aberdeen the last few days with only an old Android Tablet with me - really no good for listening to bass on! After an 'interesting' hike back yesterday, I've been able to listen to this through a decent speaker. It sounds GREAT! Nice playing too (but don't tell @ped - it'll only go to his head ) Thanks! Quote Link to comment Share on other sites More sharing options...
ped Posted December 13, 2022 Share Posted December 13, 2022 9 hours ago, Hellzero said: Strangely @ped there is a Mick Karn vibe in your sound when there's 80% balance of the rear (I still don't know which pickup you mean) and 30% tone, and I love it. It’s a nice tight growl on that REAR pickup! (Bridge!). Mick Karn always copied me so that makes sense. 3 Quote Link to comment Share on other sites More sharing options...
Marc S Posted December 13, 2022 Share Posted December 13, 2022 Really like the range of tones you're getting from this bass. @Andyjr1515has done a great job with this one. When you first asked whether you should "mod" a bass of this vintage - I initially had some doubts - but of course, it's an "ideal" bass for such alterations, because of the modifications it had already undergone. Plus, you were right to straighten the bridge, and Andy was the right guy to do it. Well done @ped- that's a mighty fine bass you have there. I've only recently picked up short scale again, and I like my Mustang. But perhaps I should consider swapping to similar pickups to yours.... just not quite yet 2 Quote Link to comment Share on other sites More sharing options...
ped Posted April 27, 2023 Share Posted April 27, 2023 I've thrown some Elixir rounds on this thing and it absolutely works. Here's a small clip to demo the sounds (80% neck, both, bridge, neck again, then I turned the Mutron on for a laugh). The tone is about halfway for most of the video - it has a really useful range and mixed with the different pickup flavours it means I have loads of options. It has such a tight and full bottom end, even being short scale and in drop D! 6 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.