Craig Robinson Posted December 17, 2022 Share Posted December 17, 2022 Hi all I have just installed two soapbar emgs into a bass with all the solderless wiring. It is a vol tone for each pickup but when I turn the volume down it doesn't make it silent? I have used factory basses with emgs and no problem but this is first time just upgrading the pups. I have tried just one pickup vol and tone but it's the same. Any info/advice would be very welcome. Thanks in advance...... Quote Link to comment Share on other sites More sharing options...
hubrad Posted December 18, 2022 Share Posted December 18, 2022 (edited) I'm assuming you have the EMG pots among the kit? Quite different values at 25 or 50k as opposed to 250/500. I've used loads of EMG over the years, and done alot with wiring, and not had this problem with them. Edited December 18, 2022 by hubrad Quote Link to comment Share on other sites More sharing options...
Craig Robinson Posted December 18, 2022 Author Share Posted December 18, 2022 Hi bud Yes used the EMG pots. Think it was user error thanks. Possibly the way I had wired the output socket 🙃🙃 but works now. Thanks for the reply though 👍👍 1 Quote Link to comment Share on other sites More sharing options...
hubrad Posted December 18, 2022 Share Posted December 18, 2022 Excellent! My next suggestion was going to be to double check all the connectors were the right way round. Glad it's sorted. 👍 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.