Basscabman Posted February 3, 2023 Share Posted February 3, 2023 Bought this On Tuesday and have noticed the pickup output Is really low compared to my CV Jazz and P. Also when raising the tone the volume gets louder? Anyone else own one of these and can tell me If It's the norm? Other than that It's a cracking bass, Quality Crafted In China build. Cheers. 1 Quote Link to comment Share on other sites More sharing options...
Doctor J Posted February 4, 2023 Share Posted February 4, 2023 Can you elaborate on the tone control. When you turn the tone all the way down, does the volume go all the way down? Is it functioning as a tone control at all? When the tone is all the way up is the output acceptable in comparison to your other basses. Etc. It sounds like you have a wiring issue but, with such scant details, it's not easy to guess what the problem actually is. Quote Link to comment Share on other sites More sharing options...
Basscabman Posted February 4, 2023 Author Share Posted February 4, 2023 When I turn the tone all the way down you can still hear the bass but the output is super low, turn the tone full up and It doubles the volume. Tone Is working as a tone control but seems to be increasing and decreasing the volume too. Quote Link to comment Share on other sites More sharing options...
Basscabman Posted February 4, 2023 Author Share Posted February 4, 2023 Just In case this helps. Quote Link to comment Share on other sites More sharing options...
kodiakblair Posted February 5, 2023 Share Posted February 5, 2023 1 hour ago, Basscabman said: Just In case this helps. Is that a white ground back of the Vol pot ? If it is, what lug is the other end soldered to ? Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted February 5, 2023 Share Posted February 5, 2023 Its hard to work anything out from that picture, but if your volume is working fine, and your tone is doing something but the volume is reduced with the tone down, it generally means your tone cap is acting like a resistor, so is shorting out or something Quote Link to comment Share on other sites More sharing options...
Basscabman Posted February 5, 2023 Author Share Posted February 5, 2023 18 hours ago, kodiakblair said: Is that a white ground back of the Vol pot ? If it is, what lug is the other end soldered to ? The white comes from the pickup and Is soldered to the first tab on the volume pot. Quote Link to comment Share on other sites More sharing options...
kodiakblair Posted February 5, 2023 Share Posted February 5, 2023 33 minutes ago, Basscabman said: The white comes from the pickup and Is soldered to the first tab on the volume pot. I see that one, marked it with a black cross. It's the one I've marked in yellow, looks to be the bridge ground but if that's the case why is the bare wire soldered and the white snaking down to the middle Vol pot lug ? Quote Link to comment Share on other sites More sharing options...
Basscabman Posted February 5, 2023 Author Share Posted February 5, 2023 That white one goes to the jack socket... Quote Link to comment Share on other sites More sharing options...
Basscabman Posted February 5, 2023 Author Share Posted February 5, 2023 Some more pics, might help. Quote Link to comment Share on other sites More sharing options...
kodiakblair Posted February 5, 2023 Share Posted February 5, 2023 15 minutes ago, Basscabman said: might help. I'm going to need it 😀 Just looking through the different ways these have been wired over the years but I've none that match this. What are you like with a soldering iron ? I'd be tempted to redo it to something simple like this. Quote Link to comment Share on other sites More sharing options...
Basscabman Posted February 5, 2023 Author Share Posted February 5, 2023 Lol me and soldering do NOT get on! That pic looks a lot less cluttered than mine. Quote Link to comment Share on other sites More sharing options...
kodiakblair Posted February 5, 2023 Share Posted February 5, 2023 5 minutes ago, Basscabman said: Lol me and soldering do NOT get on! That pic looks a lot less cluttered than mine. PM sent 👍 Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted February 5, 2023 Share Posted February 5, 2023 Mmm. Looks like the pup wire is core to wiper vol pot and screen to pot, white from vol pot to out jack... (tother end ground) Plus Bridge Ground wire, Pot Ground Link, possibly cavity ground wire... all adds up and can become cluttered... Where are you based(!) ? Quote Link to comment Share on other sites More sharing options...
Woodinblack Posted February 5, 2023 Share Posted February 5, 2023 I think there is a lot here that is largely irrelevant to the problem. Although the photo looks wrong, and it seems things are wired wrong, that has nothing to do with the symptoms as described. The OP is not complaining at all about the operation of the volume control, which I assume works fine, volume goes up, volume goes down, they are complaining about the function of the tone, which also puts the volume down when wound down. The only thing that can cause that is to much signal going through the capacitor, being shorted to ground in the tone control. Which means either the capacitor is shorted, or partially resistant, or the pot itself has a short between the case and the track (unlikely). Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.