OLP MM2

[ern500evo]

Having recently remembered that tucked away under the spare bed I had a OLP MM2 with the electrics removed, I thought I’d maybe bring it back to life. I’ve stripped the body back to wood to refinish it in Seafoam green to match my Yamaha Attitude Ltd. I have a Warman pickup that I bought to put in a Harley Benton bass, but now I’m thinking that I could put that in the OLP. Controls wise, all I have is a bare plate and the knobs, no pots. If I recall correctly, the controls were V-V-T, so my question is, if I was to get a @KiOgon loom made up, would that, along with the pickup, knobs and plate I already have, be all I need to make it work. As you can probably tell, bass electrics are not my strong point! TIA for any info and/or advice! 

[PaulThePlug]

Presume single 'pair' pickup, and the Warman being twin coil split for the VV?

Got a jack socket?

[ern500evo]

3 minutes ago, PaulThePlug said:

Presume single 'pair' pickup, and the Warman being twin coil split for the VV?

Got a jack socket?

This was the advice I got when asking about fitting the Warman to a Harley Benton with VVT controls. The control plate I’ve got does have a jack socket 

[KiOgon]

Yes, can do a loom for that, PM me 👍

[pete.young]