Todd Posted February 25, 2023 Share Posted February 25, 2023 (edited) Hey! I’ve got a tech21 sansamp bass driver, and at practice a couple of days ago stood on the lead coming out of it and it’s not working properly! when I push downwards on the cable it gets signal again but as soon as I let go it’s gone. Hoping this is a simple fix and wondered if anyone could help me? thank you in advance Edited February 25, 2023 by Todd Quote Link to comment Share on other sites More sharing options...
Bunion Posted February 25, 2023 Share Posted February 25, 2023 (edited) Open it up, you may have just bent the spring contact inside, or pulled a wire off, either way you need to get in to see check you haven’t pulled the wires off the contacts in the cable too Edited February 25, 2023 by Bunion Quote Link to comment Share on other sites More sharing options...
Todd Posted February 25, 2023 Author Share Posted February 25, 2023 5 minutes ago, Bunion said: Open it up, you may have just bent the spring contact inside, or pulled a wire off, either way you need to get in to see check you haven’t pulled the wires off the contacts in the cable too I opened it up but can’t seem to get the PCB out the way to see anything! Quote Link to comment Share on other sites More sharing options...
John Cribbin Posted February 25, 2023 Share Posted February 25, 2023 Bunion's diagnosis is the most likely diagnosis. Don't know your unit, so this is guesswork .... If the pots are soldered directly to the PCB, there's a good chance if you remove the knobs and loosen the nuts underneath the contents will come out. Or not as the case may be. Quote Link to comment Share on other sites More sharing options...
Todd Posted February 25, 2023 Author Share Posted February 25, 2023 18 minutes ago, John Cribbin said: Bunion's diagnosis is the most likely diagnosis. Don't know your unit, so this is guesswork .... If the pots are soldered directly to the PCB, there's a good chance if you remove the knobs and loosen the nuts underneath the contents will come out. Or not as the case may be. I loosened everything off but it still won’t come out Quote Link to comment Share on other sites More sharing options...
itu Posted February 25, 2023 Share Posted February 25, 2023 Can we see, so could you share some sharp pictures? We might be able to help you forward. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.