Honher Jack bass replacement pups, Passive?

[KingPrawn]

Evening. 

Can anyone advice on what i would need to look for to replace the pups on my Honher Jack 4 string? i have the dimensions of the pups at 68mm length x 32mm wide. This is an approximate size ( my eye sight is stinky poo) The bass is passive. Ive gone back to it after it sitting dormant for a while. I like bridge pup but the neck pup is very dull. . I was thinking about converting to an active bass. However not sure if this is possible? @KiOgon

 

Any advice appreciated

 

KP

[PaulThePlug]

Blade type buckers?

https://www.warmanguitars.co.uk/product/drivetrain-quad-coil-29-87-kohm-ultra-output-pickup-4-wire-our-highest-output-dual-humbucker/

Or

https://www.gear4music.com/Guitar-and-Bass/Belcat-BH-31-EMG-Type-Humbucker-Pickup/B7F?origin=product-ads&gclid=EAIaIQobChMI79_Wy5XD_QIVpOjtCh34zAgAEAQYBSABEgIlu_D_BwE

 

[KingPrawn]

23 hours ago, PaulThePlug said:

Blade type buckers?

https://www.warmanguitars.co.uk/product/drivetrain-quad-coil-29-87-kohm-ultra-output-pickup-4-wire-our-highest-output-dual-humbucker/

Or

https://www.gear4music.com/Guitar-and-Bass/Belcat-BH-31-EMG-Type-Humbucker-Pickup/B7F?origin=product-ads&gclid=EAIaIQobChMI79_Wy5XD_QIVpOjtCh34zAgAEAQYBSABEgIlu_D_BwE

 

Cheers

[Jabba_the_gut]

I got a pair of pickups for a B2A (same size I believe) made by Kent Armstrong some years ago. These allow for coil splitting so a bit more variation is possible. Might be worth a look to see if they still do something.