oldsod Posted April 6, 2023 Share Posted April 6, 2023 Hi all, i have an epiphone eb0 that desperately needs a new pickup and electrics, i would like to go solderless if possible, i am thinking about di'marzio dp120 with push pull for series parallel operation but not to sure, any advice would be very gratefully received. This is my backup bass for when my shoulder injury acts up and stretching to the low end becomes awkward. Music played, classic rock, reggae, soul, blues well almost anything really. Cheers all, looking forward to suggestions. Quote Link to comment Share on other sites More sharing options...
neepheid Posted April 10, 2023 Share Posted April 10, 2023 Solderless might be a stretch though. 2 Quote Link to comment Share on other sites More sharing options...
Paul S Posted April 10, 2023 Share Posted April 10, 2023 I fitted a DiMarzio to an Epiphone EB-0 some years back, more recently the Artec to an Antoria EB-3. To my ears there was little difference, I actually preferred the Artec which if I recall was around 1/4 of the price. I'd be interested to hear the Retrovibe one as all the Retrovibe pickups I have had fitted - the 50s single coil P bass and the Rickenbacker style - are absolutely tbrilliant. 2 Quote Link to comment Share on other sites More sharing options...
Col the Plunker Posted May 12, 2023 Share Posted May 12, 2023 Interesting post guys. I recently acquired an EB0. I found that the Epi pup was okay in tone, but definitely didn't set the world alight. Also I discovered a dead spot around the E string, so much that I had to unscrew and raise the pole to such an extent that it became a sloppy fit. The Artic brand is the one I am going for as all reviews prove that it maintains the mudbucker tone most authentically. Going for ceramic magnets rather than Alnicos to keep the boom in check. Looking forward to it's arrival. Will keep you posted. 2 Quote Link to comment Share on other sites More sharing options...
JohnDaBass Posted May 14, 2023 Share Posted May 14, 2023 On 10/04/2023 at 10:31, Paul S said: I fitted a DiMarzio to an Epiphone EB-0 some years back, more recently the Artec to an Antoria EB-3. To my ears there was little difference, I actually preferred the Artec which if I recall was around 1/4 of the price. +1 I fitted an Artec EBC-4 to my reissue Epiphone Newport bass and it adds so much more of the 60's & 70's Gibson EBO/EB3 low end to the Newport. The combination of the EBC-4 and the stock TB Pro bridge Pup offers a very wide range of tone colours with the simplicity of balance control. The Artec EBC-4 is a great upgrade for any EBO /EB3. 1 Quote Link to comment Share on other sites More sharing options...
goingdownslow Posted May 15, 2023 Share Posted May 15, 2023 The Artec pickup I tried was no different than the Epi pickup, both a far cry in depth and output from an original Gibson humbucker. There must be more to it than the 30kΩ resistance. The magnets in the Artec were in the wrong orientation on my pickup but correcting them made no difference. 1 Quote Link to comment Share on other sites More sharing options...
lidl e Posted May 15, 2023 Share Posted May 15, 2023 I just put a Dimarzio mudbucker in a bass snd i absolutely love it. Great output and killer tone. 2 Quote Link to comment Share on other sites More sharing options...
Col the Plunker Posted May 18, 2023 Share Posted May 18, 2023 On 15/05/2023 at 22:25, goingdownslow said: The Artec pickup I tried was no different than the Epi pickup, both a far cry in depth and output from an original Gibson humbucker. There must be more to it than the 30kΩ resistance. The magnets in the Artec were in the wrong orientation on my pickup but correcting them made no difference. Good to know the the magnet orientation made no difference, as I never checked when I installed my Artec yesterday. Is it that obvious to tell which way around they go? Quote Link to comment Share on other sites More sharing options...
Col the Plunker Posted May 18, 2023 Share Posted May 18, 2023 (edited) On 15/05/2023 at 22:41, lidl e said: I just put a Dimarzio mudbucker in a bass snd i absolutely love it. Great output and killer tone. I thought about choosing a Dimarzio, but understood it's humbucker rather than a true mudbucker design, and I honestly like that old tone. If it were my only bass then I would have gone Dimarzio for more tonal width. Luckily my Trace Elliot amp works well with the Artec. Edited May 18, 2023 by Col the Plunker 2 Quote Link to comment Share on other sites More sharing options...
lidl e Posted May 18, 2023 Share Posted May 18, 2023 21 minutes ago, Col the Plunker said: I thought about choosing a Dimarzio, but understood it's humbucker rather than a true mudbucker design, and I honestly like that old tone. If it were my only bass then I would have gone Dimarzio for more tonal width. Luckily my Trace Elliot amp works well with the Artec. It also looks so cool! I find myself using it more than the bart J or MM i have in the same bass. My frankenstein i built. I hooked it up to a 12 step varitone knob and i just love it! It is very very versatile 1 Quote Link to comment Share on other sites More sharing options...
goingdownslow Posted May 18, 2023 Share Posted May 18, 2023 (edited) 54 minutes ago, Col the Plunker said: Good to know the the magnet orientation made no difference, as I never checked when I installed my Artec yesterday. Is it that obvious to tell which way around they go? I was meaning more along the lines of when corrected it still never sounded like a Gibson mudbucker. The orientation does need to be correct If I remember correctly the 4 magnets have a white mark along the edge. These all want to be facing away from each other or all on the steel plate. Forget about 'like poles repel, unlike poles attract', the steel plate wants only one (the same) polarity on it from all 4 magnets. Edited May 18, 2023 by goingdownslow 1 Quote Link to comment Share on other sites More sharing options...
kodiakblair Posted May 21, 2023 Share Posted May 21, 2023 On 15/05/2023 at 22:41, lidl e said: I just put a Dimarzio mudbucker There was no such thing. The Model One was intended to be a drop-in replacement for EB models but that was all. Clue is given in the first sentence. The name Sentell gave to their version makes no bones about it's purpose 😃 2 1 Quote Link to comment Share on other sites More sharing options...
lidl e Posted May 21, 2023 Share Posted May 21, 2023 5 minutes ago, kodiakblair said: There was no such thing. The Model One was intended to be a drop-in replacement for EB models but that was all. Clue is given in the first sentence. The name Sentell gave to their version makes no bones about it's purpose 😃 I found that out after i out it in! It sounds incredible and loke i said, so versatile. 1 Quote Link to comment Share on other sites More sharing options...
kodiakblair Posted May 21, 2023 Share Posted May 21, 2023 5 minutes ago, lidl e said: I found that out after i out it in! It sounds incredible and loke i said, so versatile. Nae good to me, I was after mud 👍 2 Quote Link to comment Share on other sites More sharing options...
Col the Plunker Posted June 2, 2023 Share Posted June 2, 2023 On 18/05/2023 at 21:20, lidl e said: It also looks so cool! I find myself using it more than the bart J or MM i have in the same bass. My frankenstein i built. I hooked it up to a 12 step varitone knob and i just love it! It is very very versatile Wow! That is one killer looking SG. Talk me through that beauty! PS: I'm loving the Artec. I wasn't expecting it to be so LOUD... 1 Quote Link to comment Share on other sites More sharing options...
Col the Plunker Posted June 2, 2023 Share Posted June 2, 2023 (edited) On 21/05/2023 at 22:02, kodiakblair said: Nae good to me, I was after mud 👍 Me too. Got it in droves now... Edited June 2, 2023 by Col the Plunker 1 Quote Link to comment Share on other sites More sharing options...
Col the Plunker Posted June 2, 2023 Share Posted June 2, 2023 On 15/05/2023 at 22:25, goingdownslow said: The Artec pickup I tried was no different than the Epi pickup, both a far cry in depth and output from an original Gibson humbucker. There must be more to it than the 30kΩ resistance. The magnets in the Artec were in the wrong orientation on my pickup but correcting them made no difference. I'm really surprised about that, as dropping in the Artec to me was like the difference between a rain shower, and a monsoon! Then again, the original Epi pickup did seem pretty flat sounding to start with. Quote Link to comment Share on other sites More sharing options...
lidl e Posted June 2, 2023 Share Posted June 2, 2023 32 minutes ago, Col the Plunker said: Wow! That is one killer looking SG. Talk me through that beauty! PS: I'm loving the Artec. I wasn't expecting it to be so LOUD... Cheers, my man. it's a homemade bass i made back like 20 years ago. Built with a buddy from raw wood. I never got it right and recently pulled it out and brought it to a local luthier to do a bunch of major modifications to it. It is an unreal tonemonster now! So flexible. I used it to record most of our next album. It's a bit heavy, but under 10 lbs, but it has literally every tone under the sun! One of the mods i did was put a 12 position varitone in. I made a short build thread here when i had the mods done going through the bits: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.