DPA CORE 4099 Instrument Microphone with Clamp Mount - *WITHDRAWN* £325 Hull

[probonopublico]

Purchased under two years ago to attach on the back of my bouzouki.  Our violinist had one and it sounded great but I couldn't get it close enough to the sound hole.  They are fantastic instrument mics and this comes with the clamp mount although if you need a different mount for a guitar or drums they can be purchased easily.  I also bought a spare cable that connects the mic to the microdot connector.  The cable that comes with the mic was a bit thin and I wanted a spare.  The spare is thicker and more robust.  Both will be supplied with the mic.  The mic is in great condition and comes with a hard case and a soft case.  It's only been gigged twice.

 

Postage will be around £25 as it will need insuring - or local pickup

 

Details are:

What's included?

1 x DPA CORE 4099 Loud SPL Instrument Microphone

1 x DPA CM4099 Microphone Clamp Mount

1 x DPA CM1618B00 Extension Cables, 1.6mm

1 x DPA DAD6001-BC MicroDot to 3-Pin XLR Adapters (with Belt Clips)

 

Features

CORE by DPA technology inside

Superior gain before feedback

Natural sound that is easy to blend with pickup

Flexible and easy mounting

Gentle yet secure positioning to your instrument

Compact and discreet design

IP58 rating protects against water and dust

Detachable cable and a versatile gooseneck extension

Flexible adapter system fits most professional wireless systems

 

Specifications

Directional Pattern: Supercardioid

Principle of Operation: Pressure gradient

Cartridge Type: Pre-polarized condenser

Frequency Range: 20Hz - 20kHz

80Hz - 15kHz with 2dB soft boost at 10-12kHz (+/-2dB at 20cm)

Sensitivity: 6mV/Pa; -44dB re. 1 V/Pa (nominal, +/-3dB at 1kHz)

Equivalent Noise Level: Typ. 23dB(A) re. 20µPa (max. 26dB(A))

S/N Ratio: Typ. 71dB(A) (re. 1kHz at 1 Pa (94dB SPL))

Total Harmonic Distortion:

Dynamic Range: Typ. 108dB

Maximum SPL: 142dB, peak before clipping

Output Impedance:

From MicroDot: 30 - 40 Ohms

From DAD4099 / DAD6001-BC: 100 Ohms

Cable Drive Capability: Up to 300m (984ft) with a DAD4099 or DAD6001-BC XLR adapter

Output Balance Principle: Signal balanced with DAD4099 or DAD6001-BC XLR adapter

Common Mode Rejection Ratio: >60dB from 50Hz to 15kHz with DAD4099 or DAD6001-BC XLR adapter

Power Supply: Min. 5V to max. 50V (through DPA adapter for wireless systems)

Current Consumption: Typ. 1.5mA (microphone) (3.5mA with DAD4099 or DAD6001-BC XLR adapter

Connector: MicroDot

Colour: Black

Weight: 27g / 0.95oz

Microphone Diameter: 5.4mm / 0.21''

Microphone Length: 45mm / 1.8''

Cable Diameter: 1.6mm (0.06'') / 2.2mm (0.09'')

Cable Length: 1.8m / 5.9ft

Polarity: +V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099 or DAD6001-BC XLR adapter)

Gooseneck Length: 140mm / 5.5''

Product Code: 4099-DC-1-101-CM

Edited May 30, 2023 by probonopublico

[atsampson]

For Basschat purposes, it's worth noting that DPA do the BC4099 double bass mount which clips onto the strings below the bridge. I use one of these on my DB and it works nicely.

[songofthewind]

Can’t go wrong with DPA! GLWTS.