Shure PSM 200 IEM System For sale £215 - *SOLD* £350 Birmingham

[KingPrawn]

This has been my go-to IEM Set up for the last few years. A well above average introductory level system. The sure brand is pure quality. It has been kept in a Gator case form new so has no marks etc. You will see from the pictures it comes with the original headphones, lead and rack ears, which have never been opened. Original packaging.

 

Happy to discuss postage to a UK address or meet up close to Brumland

 

 

Full Description

 

Robust and Reliable Wireless Monitoring System

Built-In Headphone and Audio Limiter

Front Mounted Antenna

2 x Mic/Line Input Channels for Mix Control 

Up to 100m Operating Distance

Volume Control on Bodypack Receiver

Rack Mountable (1/2 Rack Space)

High Performance SE112 In-Ear Headphones

Selectable Frequency Bandwidth (600-630 MHz)

Specifications

General

Transmitter Inputs: 2 x XLR / 6.3mm Jack Combo (Mic/Line Level)

Transmitter Output: 2 x XLR Split Outputs

Frequency Response: 30 Hz - 12 kHz

Transmitting Frequency: 600-630 MHz (Selectable)

RF Output Power: 10 - 30 mW

Operating Distance: Up to 100m

Harmonic Distortion: 1.5 

S/N Ratio: 80 dB (A)

Listening Mode: Mono

Compatible Systems (Per Band): 4

Wired Body Pack Option: Yes

Personal Mix Control: On Transmitter

Remoteable Transmitter: No

Battery Life (Wired): 6 Hours 

Battery Life (Wireless): 4 Hours

EP2T TransMixer

Modulation Limiter: Internal Peak Limiter (>10:1 Hard Knee Compression)

Antenna: 1/4 Wavelength, Semi-Rigid, PCB Mount

Connector Type: XLR / 1/4" Jack Combo

Nominal Input Level: - 25 dBu (50 Volume)

Maximum Input Level: - 5 dBu (50 Volume)

Current (Max): 170 mA 

Height: 8.6"

Width: 5.6"

Depth: 1.7"

Weight: 370g

P2R Receiver

RF Sensitivity: 109 dBm

Squelch Threshold: 102 dBm

Antenna: Attached Whip

Audio Input Connector: 1/4" Jack (Mono)

Impedance: 1 M Ohm

Input Level (Max): LO - 0 dBu / HI - 10 dBu

Frequency Response: 30 Hz to 20 kHz (Earphone Dependent)

Power Requirements: 9 V Battery

Audio Output Connector: 1/8" Jack

Minimum Load Impedance: 8 Ohms

Height: 4.809"

Width: 2.875"

Depth: 1.251"

Weight: 100g

SE112 Earphones

Earphone Type: In-ear

Frequency Response: 25 Hz - 17.5 kHz

Sensitivity: 108 dB (1 kHz)

Impedance: 16 Ohms

Input Connector: 3.5mm

Finish: Grey

Cable Length: 127 cm

Edited June 9, 2023 by KingPrawn