spencer.b Posted June 25, 2023 Share Posted June 25, 2023 Gig yesterday, horrible load in so I took my little EA wizzy 10 thinking I'd let the PA do the heavy lifting, PA was awful so just used the amp , I normally use the wizzy for double bass and this was on electric, used a powerful head and turned up and up and in the last song it stopped working completely, head is fine , what do you guys reckon is wrong with it? Quote Link to comment Share on other sites More sharing options...
Downunderwonder Posted June 25, 2023 Share Posted June 25, 2023 Most likely you have toasted the driver. Possible loose connection. Optional recone / replace / reconnect. You might want to have a look at the crossover if it has one. Golden rule for getting loud: turn up until it's not hardly getting any louder and turn it back down a smidge. If that's not loud enough, tough. You can take out some low bass and try again but beware of it getting quieter all by itself. That means it's overheating, probably what you did. 1 Quote Link to comment Share on other sites More sharing options...
Downunderwonder Posted June 26, 2023 Share Posted June 26, 2023 Were you wanting to diagnose / fix it yourself? There's not a lot you can do without taking to it with a screwdriver or two. By the same token there's not a lot more than that to having it up and running. You could save a fair amount on paying a shop if you're into that sort of thing. Quote Link to comment Share on other sites More sharing options...
spencer.b Posted June 26, 2023 Author Share Posted June 26, 2023 I was thinking whether it was worth taking to my repair guy or just binning it tbh , I could take it apart but wouldn't be sure what I was looking for in terms of diagnosis Quote Link to comment Share on other sites More sharing options...
Downunderwonder Posted June 26, 2023 Share Posted June 26, 2023 You can take the driver out and test it with a 9v battery on the the leads. It will either pop or just sit there. That's what I would do only because I am pretty confident from your description of how it went down that it's toast. Popping in a replacement is then the opposite of taking out the busted one. If it does pop you have some more investigating to do but I am betting it won't. If there is a jack panel you can take off that could be a better 1st move. Be on the lookout for burnt smells. It might save you from having to remove the driver if you find a lost connection. 1 Quote Link to comment Share on other sites More sharing options...
spencer.b Posted June 26, 2023 Author Share Posted June 26, 2023 Thanks for that mate I'll give it a go later Quote Link to comment Share on other sites More sharing options...
Downunderwonder Posted June 26, 2023 Share Posted June 26, 2023 If your driver is toast you can get a drop in original replacement at no little expense from Golihurs in US. They are great at shipping but you're probably looking at 300 squid to your door after tax. Might as well get two as the last 13 in stock are all there are in the world. Quote Link to comment Share on other sites More sharing options...
spencer.b Posted June 26, 2023 Author Share Posted June 26, 2023 (edited) Taken it apart, yep as you said speaker is toast , melted coil or something like that I reckon, think I might just get a new speaker not the proper one though at £300 and messing about with import duty etc, found a faital pr10pr310 on eBay for about £130 , Edited June 26, 2023 by spencer.b Quote Link to comment Share on other sites More sharing options...
tauzero Posted June 26, 2023 Share Posted June 26, 2023 It may be possible to get it reconed. I remember Wembley Loudspeakers http://www.wembleyloudspeaker.com/ being mentioned for this before (I've not used them myself). 1 Quote Link to comment Share on other sites More sharing options...
Owen Posted June 26, 2023 Share Posted June 26, 2023 8 hours ago, spencer.b said: Taken it apart, yep as you said speaker is toast , melted coil or something like that I reckon, think I might just get a new speaker not the proper one though at £300 and messing about with import duty etc, found a faital pr10pr310 on eBay for about £130 , I am not really qualified to be spouting about this on a public forum. This has never stopped me. I am sure that the Faital is a fine, fine driver. If it is expecting to see an enclosure which is a different size from the EA then you are likely to be dissapointed. Thiele small blah blah resonanace blah blah loading blah blah. 1 Quote Link to comment Share on other sites More sharing options...
mrtcat Posted June 26, 2023 Share Posted June 26, 2023 10 minutes ago, Owen said: I am not really qualified to be spouting about this on a public forum. This has never stopped me. I am sure that the Faital is a fine, fine driver. If it is expecting to see an enclosure which is a different size from the EA then you are likely to be dissapointed. Thiele small blah blah resonanace blah blah loading blah blah. This 100%. Drivers need to be in cabs that are designed to suit them. Maybe better to measure the internal dimensions of the cab and ask the clever folk who designed the Basschat DIY can for some advice on a suitable replacement driver. Quote Link to comment Share on other sites More sharing options...
spencer.b Posted June 26, 2023 Author Share Posted June 26, 2023 44 minutes ago, Owen said: I am not really qualified to be spouting about this on a public forum. This has never stopped me. I am sure that the Faital is a fine, fine driver. If it is expecting to see an enclosure which is a different size from the EA then you are likely to be dissapointed. Thiele small blah blah resonanace blah blah loading blah blah. I'm sure you're right but the proprietory driver is more than the cab's worth and I had thought I'd just take my chances with the highest spec speaker at a good price and I found someone using a faital in a wizzy on talkbass , but if anyone has any recommendations for a wizzy 10" alternative I'm all ears Quote Link to comment Share on other sites More sharing options...
spencer.b Posted June 26, 2023 Author Share Posted June 26, 2023 37 minutes ago, mrtcat said: This 100%. Drivers need to be in cabs that are designed to suit them. Maybe better to measure the internal dimensions of the cab and ask the clever folk who designed the Basschat DIY can for some advice on a suitable replacement driver. Do you have a username for those guys? Thanks Quote Link to comment Share on other sites More sharing options...
Owen Posted June 26, 2023 Share Posted June 26, 2023 3 minutes ago, spencer.b said: I'm sure you're right but the proprietory driver is more than the cab's worth and I had thought I'd just take my chances with the highest spec speaker at a good price and I found someone using a faital in a wizzy on talkbass , but if anyone has any recommendations for a wizzy 10" alternative I'm all ears The faital might actually work. But be aware that equally you would screw it all in and find that it was not the cab you remember. Quote Link to comment Share on other sites More sharing options...
Mykesbass Posted June 26, 2023 Share Posted June 26, 2023 There are some very knowledgeable types over on the amps and cabs section who could probably give you advice on viable replacement drivers. They may turn up here, but worth putting a 'what replacement driver for my EA Wizzy' thread on there. Quote Link to comment Share on other sites More sharing options...
Downunderwonder Posted June 26, 2023 Share Posted June 26, 2023 3 hours ago, Owen said: Thiele small I think it's more actual 'blah blah' as it's some weird cab design inside according to the blurb. The proper driver is 197USD plus shipping plus VAT when it lands but you might get it less for it being exported so no US state sales tax. I think I might have done the conversion the wrong way last night. Closer to 200 quid to your door? That's what I would do. There's a talkbass thread about using another Eminence 10 with a crossover and compression driver to get same enough sound but a lot of shagging around and probably cost same. Quote Link to comment Share on other sites More sharing options...
spencer.b Posted June 27, 2023 Author Share Posted June 27, 2023 8 hours ago, Downunderwonder said: I think it's more actual 'blah blah' as it's some weird cab design inside according to the blurb. The proper driver is 197USD plus shipping plus VAT when it lands but you might get it less for it being exported so no US state sales tax. I think I might have done the conversion the wrong way last night. Closer to 200 quid to your door? That's what I would do. There's a talkbass thread about using another Eminence 10 with a crossover and compression driver to get same enough sound but a lot of shagging around and probably cost same. Just saw this when I tried to look at shipping! Due to recent Brexit-related changes, we require a minimum order of $275 (USD) to countries within the United Kingdom/Great Britain. Shipping options will not appear in your cart until you exceed that amount. !!! I'm not sure but I think US sales tax isn't on that price so I'd be hit with Vat and import duty when it got here so your original estimate of £300 isn't far off ?? Think I might just bin it now tbh 😞 Quote Link to comment Share on other sites More sharing options...
tauzero Posted June 27, 2023 Share Posted June 27, 2023 1 hour ago, spencer.b said: Just saw this when I tried to look at shipping! Due to recent Brexit-related changes, we require a minimum order of $275 (USD) to countries within the United Kingdom/Great Britain. Shipping options will not appear in your cart until you exceed that amount. !!! I'm not sure but I think US sales tax isn't on that price so I'd be hit with Vat and import duty when it got here so your original estimate of £300 isn't far off ?? Think I might just bin it now tbh 😞 Have you tried Wembley Loudspeakers yet? 1 Quote Link to comment Share on other sites More sharing options...
spencer.b Posted June 27, 2023 Author Share Posted June 27, 2023 49 minutes ago, tauzero said: Have you tried Wembley Loudspeakers yet? Yes mate , sent an email last night 🤞 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.