sprocketflup Posted July 7, 2023 Share Posted July 7, 2023 (edited) Here we have a 1st generation Sire M7 4 string. I had this up for sale once before, but took it down as I was using it. Back to not being used now so back up for sale it goes. Anyone who has played one of these will confirm that the pre-amps give a bewildering array of options, and this model is also equipped with series/parallel switching for each pickup too. The bass itself has a really nice feel, good neck and nice action. The amble from Sire/Marcus Miller - And plenty more info if you like here - https://www.sire-revolution.com/product/sire-marcus-miller-m7/ Body Material : Alder/Ash with Solidtop Hard Maple Wood Body Shape : New Modern Bass Body Color : Alder Body – BRB, TBLB | Ash Body – NT, TBKB Neck Material : Canadian Hard Maple(Scarf Joint) Neck Shape : C-Shape Scale : 34”-35“(For 5 string 35” for clear low B) Neck Joint : 4/5 Bolt Individual Dot (5 hole for 5 string) Fingerboard(Rolled Edges) : Ebony Fingerboard Radius : 12” Frets : Medium, 24 Frets String Nut : 4 String – Natural Bone 38mm width / 5 String – Natural Bone 45mm width Binding : None Inlay : White Pearl Dot Pickups : Marcus Pure-H Revolution Set Electronics : Marcus Miller Heritage-3 with Middle Frequency Control Knobs : Modern Black Plastic Bridge : Marcus Miller Heavy Mass Custom Tuning Gear : Sire Diecasting Gear Hardware Finish : Black The weight according to my bathroom scales is 3.8kg. Blemishes, ive done my best to photograph them. There is a couple of small dents near the battery box, another near the jack and one more on the bottom horn at the back. Nothing too glaring, and certainly not 'roadworn'. As suggested down below, i can post this if preferred, though personally I'd much rather this was collected from near Axminster, I do travel around the country for my various works, and am willing to meet if someone wishes within reason. Underside of bottom horn dent Back of tophorn dent Edited November 18 by sprocketflup 3 Quote Link to comment Share on other sites More sharing options...
sprocketflup Posted August 30, 2023 Author Share Posted August 30, 2023 Put all my dogging gear up for sale on Ebay. Not had any bids yet but there are 14 people watching 3 Quote Link to comment Share on other sites More sharing options...
sprocketflup Posted September 9, 2023 Author Share Posted September 9, 2023 Went on a ballooning holiday recently.....put on four stone...... Quote Link to comment Share on other sites More sharing options...
MungoBass Posted September 10, 2023 Share Posted September 10, 2023 A lot of bass for the money.... GLWYS Quote Link to comment Share on other sites More sharing options...
sprocketflup Posted February 14 Author Share Posted February 14 Have I overpriced this? What dya think? Quote Link to comment Share on other sites More sharing options...
Paddy777 Posted February 21 Share Posted February 21 (edited) On 14/02/2024 at 22:07, sprocketflup said: Have I overpriced this? What dya think? Price isn’t too bad really, I think If postage was an option it would probably have gone months ago tbh. Just my opinion - I might be way off the mark 😆 Edited February 21 by Paddy777 Quote Link to comment Share on other sites More sharing options...
sprocketflup Posted February 22 Author Share Posted February 22 Who here still understands Roman Numerals? I for one 3 Quote Link to comment Share on other sites More sharing options...
.jpg.7e18f76540598a8efc0e6ca9be453059.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.