Mizzle Posted July 18, 2023 Share Posted July 18, 2023 Hello all, At some point (probably end of August by the looks of it) I will receive a GX Stomp. I've got a SA C4 and expression pedal that I'll use with it and got the hub and a DMC 3XL for some midi bits, I'll probably use my Darkglass Hyperluminal and Sonic Research Tuner. Is there anything else that would complement the stomp (been looking at various pedal boards to get an idea of what might be missing) Quote Link to comment Share on other sites More sharing options...
LukeFRC Posted July 19, 2023 Share Posted July 19, 2023 You have the Jack out for fs 4 and 5 - so either a fs for that, or use it for an expression pedal. The di out uses a TRS to xlr cable, so if you need that one of them - ive my old one kicking around, along with the Cioks current doubler is you need either the inbuilt tuner is quite good. when I had mine that was the only pedal I used with an addition foot switch - didn’t need anything else… be prepared to send some time with it and don’t be surprised to use the amp sims and have the gain stupid low. Quote Link to comment Share on other sites More sharing options...
prowla Posted July 19, 2023 Share Posted July 19, 2023 I find the HX Stomp affects the sound even with everything off, so I run mine via a looper switch so I can take it out of circuit. I have a Ninjafox 2-button momentary press with a TRS cable to the Stopmp's expression/control jack input, which I have configured to do bank up/down. I've got a Morningstar MC6 connected to my C4 (via a Neuro interface on the underside of the board), but I've yet to program it. Quote Link to comment Share on other sites More sharing options...
Jack Posted July 20, 2023 Share Posted July 20, 2023 Brightonion do a footswitch for the Stomp. It's perfect. I know this because I custom ordered a footswitch from him that was specifically designed for my stomp and it became a production model. Quote Link to comment Share on other sites More sharing options...
prowla Posted July 20, 2023 Share Posted July 20, 2023 1 hour ago, Jack said: Brightonion do a footswitch for the Stomp. It's perfect. I know this because I custom ordered a footswitch from him that was specifically designed for my stomp and it became a production model. I was chatting with the Bright Onion folks last weekend. The Ninjafox has the same profile as the Stomp and a light surround to the switches. Quote Link to comment Share on other sites More sharing options...
Mizzle Posted July 21, 2023 Author Share Posted July 21, 2023 Thank you all for the suggestion so far, I'd imagine I should be able to setup my disaster area DMC3XL a similar way as extra footswitches and be able to get the C4 going as well. It looks like a massive learning curve but being a bit techy hopefully I'll enjoy the journey. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.