owentherozzers Posted July 26, 2023 Share Posted July 26, 2023 Hi folks, I've been powering an HX Stomp from my 1SPOT CS6 for a while using the red and green adapters. Most gigs I only need the HX and one other 9v pedal. The 1SPOT is great but heavy and a bit overkill for 2 pedals. Does anything smaller and lighter power an HX Stomp and one other 9v pedal? Ideally off a standard IEC cable. Fuel Tank perhaps? Quote Link to comment Share on other sites More sharing options...
0175westwood29 Posted July 26, 2023 Share Posted July 26, 2023 from looking you need about 900 or so ma so you could try using a current doubler cable from voodoo labs and something like a strymon Ojai...........will give you 1000ma and the adaptor is nice and small the Ojai r300 is super slimline and has the iec plug aswell. 1 Quote Link to comment Share on other sites More sharing options...
itu Posted July 26, 2023 Share Posted July 26, 2023 (edited) https://truetone.com/1-spot/ Shouldn't be too big or heavy. I have one extra in the rack case. Edited July 26, 2023 by itu Quote Link to comment Share on other sites More sharing options...
admiralchew Posted July 26, 2023 Share Posted July 26, 2023 2 hours ago, 0175westwood29 said: from looking you need about 900 or so ma so you could try using a current doubler cable from voodoo labs and something like a strymon Ojai...........will give you 1000ma and the adaptor is nice and small the Ojai r300 is super slimline and has the iec plug aswell. I’ve been doing exactly this with a board that has only an HX Stomp and Darkglass Element on it. It works brilliantly and, from memory, it all fits on/under a Rockboard 2.0. 1 Quote Link to comment Share on other sites More sharing options...
admiralchew Posted July 26, 2023 Share Posted July 26, 2023 I found a picture of the top of the board. It’s a Rockboard 2.0 in a 2.1 flight case so the headphones, instrument cable and power adapter fit in too. It’s at my fiancée’s parents at the moment so I can’t photo the underneath, unfortunately. By way of disclaimer, my other Ojai R30 is in the classifieds now (as I’ve deconstructed my other boards for the moment). Quote Link to comment Share on other sites More sharing options...
AJ567 Posted July 26, 2023 Share Posted July 26, 2023 For two pedals I would use a 2-way daisy chain/splitter with a Joyo zgp adapter on the "other" pedal's daisy chain leg to isolate it. What powers the daisy chain is up to you: Regular 1Spot - fine but not IEC Gigrig generator - light and IEC but expensive Diago powerstation - cheaper than generator but it's a figure 8 cable rather than IEC Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.