Tim E Posted July 31, 2023 Share Posted July 31, 2023 (edited) The Tube Bass 2 is a dual channel preamp and DI. It is in top condition as it has only had studio use. Comes in original box with power supply. The price includes UK postage. Here is the translated description: The core are two ECC 83 / 12AX7 tubes, which are run under typical operating conditions (anode voltage over 200V-). Three stages work as voltage amplifiers, while the last stage is used for impedance conversion and sends the output signal to the input of the amplifier with low resistance and thus less sensitive to interference. What many bass players were missing with the Tube Bass has now been implemented in the new model. The "Tube Bass 2" now has a DI output that can be switched "pre" or "post EQ" including a "Ground / Lift" switch. This allows for more versatile uses. In contrast to the old Tube Bass, both channels of the "Tube Bass 2" can now be adjusted completely independently of each other in terms of preamplification (gain) and output level (master). This allows a much better coordination between the channels. The pedal is designed for bass guitars with active, passive and piezo pickup systems, with a 3-stage slide switch (PI - HI - LO) the input sensitivity can be adjusted to the bass used. The "Tube Bass 2" has a 4-band tone control that is effective for passive circuits and can shift the basic sound in different directions. Added or new to the "Tube Bass 2" are additional "Bright" and "Deep" switches for both channels independently, which, depending on the setting in connection with the tone control, makes the sound sound more bass-heavy or even more brilliant. This means that even more variability in the sound of both channels can be achieved. The tube preamp is designed in channel 2 in such a way that, depending on the setting of gain and master, rich overdrive, distortion and even fuzz distortions can be generated. The channels are displayed optically through the "tube viewing window", where the tubes are illuminated in different colors. Two status LEDs next to the "CH.1-2" button permanently show the set channel for orientation, even in bypass mode. Another new feature of the "Tube Bass 2" is the type of power supply, which is no longer AC voltage, but via a very compact 12VDC (direct current) plug-in power supply. This saves space on the pedalboard. All inscriptions and the logo are made of laminated, light and UV-resistant, durable adhesive foils. Edited July 31, 2023 by Tim E 2 Link to comment Share on other sites More sharing options...
JohnR Posted July 31, 2023 Share Posted July 31, 2023 I'll take this please. PM incoming. Link to comment Share on other sites More sharing options...
Recommended Posts