Jump to content
Why become a member? ×

So I put my old 15" combo on top of my 410 cab...


chris_pokkuri
 Share

Recommended Posts

... what a sound!

The combo is a Peavey TNT 115 200w at 2 ohms. I put it on top of my warwick 410 ext cab that I normally use with a 500w warwick profet 5.1. The sound was so much better! Loud as hell, and real beefy! It filled out the overall sound of the band - and I only had it on about 3 or 4 on the master volume. Now the downside is I think I may have broken my back lifting this beast on top of the cab by myself - it weighs 94lbs and I'm only skinny!

So, now I need to figure out how to get a sound similar to this in a lightweight package to prevent further spinal injury. Anyone got any ideas? Obviously theres the option of getting 4x10 and a 1x15 neo cabs but ideally i'd rather just need one cab or at least smaller ones? Is there a way of getting a similar sound from a different setup? Maybe a 2x10 and 1x15? Or even a 1x15 and a 1x12? Would the barefaced compact or bigone match up to a 410 and 115?

Link to comment
Share on other sites

That seems my most likely route. If I can get a similar volume and sound as the 1x15 + 4x10 weighing in at a total of 180lbs (Thats way heavier than me!) from a lightweight setup of LH1000 + Bigone weighing at under half that, it would be amazing! And I would be very happy :) <--- See!

Link to comment
Share on other sites

[quote name='chris_pokkuri' post='479714' date='May 5 2009, 05:04 AM']That seems my most likely route. If I can get a similar volume and sound as the 1x15 + 4x10 weighing in at a total of 180lbs (Thats way heavier than me!) from a lightweight setup of LH1000 + Bigone weighing at under half that, it would be amazing! And I would be very happy :) <--- See![/quote]
Don't get hung up on the 1x15/4x10 route. When you combine virtually any two cabs the sum will sound better than either on its own. All things considered the 1x15/4x10 is a poor combination, albeit a popular one. As to why it's so popular, I repeat : [i]When you combine virtually any two cabs the sum will sound better than either on its own.[/i]

Link to comment
Share on other sites

[quote name='Bill Fitzmaurice' post='479909' date='May 5 2009, 02:01 PM']Don't get hung up on the 1x15/4x10 route. When you combine virtually any two cabs the sum will sound better than either on its own.[/quote]

I'm definately not hung up on a 1x15/4x10 combination (hence my plan for the BigOne) - which is why I asked for alternatives to that combination that would fill out the sound of the band in a way that I can't get from my current setup. I think you are right in that I just liked the improvement in sound from using just the 4x10.

Cheers!

Link to comment
Share on other sites

[quote name='chris_pokkuri' post='480083' date='May 5 2009, 11:54 AM']I'm definately not hung up on a 1x15/4x10 combination (hence my plan for the BigOne) - which is why I asked for alternatives to that combination that would fill out the sound of the band in a way that I can't get from my current setup. I think you are right in that I just liked the improvement in sound from using just the 4x10.

Cheers![/quote]If you want to add to a 4x10 I'd do a 2x10, preferably loaded with the same drivers, with impedance twice that of the 4x10. That will give you a system scalable for low, medium and high output requirements.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...