Mixing 2 DB pickups

[Richard Jinman]

Perhaps this is more trouble than it’s worth, but can I mix signals from a Full Circle and a Schertler Stat B? I have an EA Doubler which has both channels active simultaneously (as I understand it) so it feels possible. But I don’t quite understand which inputs I’d use. Full Circle in high impedance presumably, but would Schertler be ok in low? Thanks

[Richard Jinman]

Just now, Richard Jinman said:

Perhaps this is more trouble than it’s worth, but can I mix signals from a Full Circle and a Schertler Stat B? I have an EA Doubler which has both channels active simultaneously (as I understand it) so it feels possible. But I don’t quite understand which inputs I’d use. Full Circle in high impedance presumably, but would Schertler be ok in low? Thanks

… or would both pups need to go into a splitter then into the same amp input?

[Beedster]

Hi Richard, hope the new rig's going well. The manual for the Doubler is here https://www.manualslib.com/manual/1458105/Euphonic-Audio-Iamp-Doubler-2.html#manual

 

I forget what the I/Ps are but I'm pretty sure you can run the two above units, I used a magnetic PUP and a mic into each channel happily.

[Richard Jinman]

6 minutes ago, Beedster said:

Hi Richard, hope the new rig's going well. The manual for the Doubler is here https://www.manualslib.com/manual/1458105/Euphonic-Audio-Iamp-Doubler-2.html#manual

 

I forget what the I/Ps are but I'm pretty sure you can run the two above units, I used a magnetic PUP and a mic into each channel happily.

Thanks!