PaulThePlug Posted October 24, 2023 Share Posted October 24, 2023 (edited) Anyone BR6ish with a router and knows how to use it? Help!.. Need a Channel routed in a pickup cavity x2 - 18mm-ish wide, length of existing cavity, to a depth of 8mm... ...so i can fit Extra Deep, Stack Coil Jazz Pickups... channel is to take the lower coil, not for the cover. ...to look like this when finished... ...and save me, and the Bass from this kinda thing... Edited October 24, 2023 by PaulThePlug Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted October 24, 2023 Author Share Posted October 24, 2023 Hold my Beer... were goin' in Armed only with a wobbly-wirry and a 7mm flat bottom drill, biggest that will go in the wobbly's chuck... Oh for a pillar drill... Might be a while taking all these down 8mm... 1 Quote Link to comment Share on other sites More sharing options...
Hellzero Posted October 24, 2023 Share Posted October 24, 2023 Nice glass, Paul. 😉 Don't rush and all will be fine. 1 Quote Link to comment Share on other sites More sharing options...
tauzero Posted October 24, 2023 Share Posted October 24, 2023 1 hour ago, PaulThePlug said: Hold my Beer... were goin' in Armed only with a wobbly-wirry and a 7mm flat bottom drill, biggest that will go in the wobbly's chuck... Oh for a pillar drill... Might be a while taking all these down 8mm... What can possibly go wrong? Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted October 24, 2023 Author Share Posted October 24, 2023 Inspired by the motivational comment by @Hellzero... and the contemplation of foresight offered by @tauzero Supported by my new sponsor, over the course of a couple of hours,I made a mess on the living room floor... half watching some Moto2 from Aus... Too late for the Dremel... and Remember, Do not operate Power Tools when 'moderate'... stick to a wobbly-whirly... As for what went wrong? Zero!.. see what i did there! 3 Quote Link to comment Share on other sites More sharing options...
tauzero Posted October 25, 2023 Share Posted October 25, 2023 11 hours ago, PaulThePlug said: Inspired by the motivational comment by @Hellzero... and the contemplation of foresight offered by @tauzero Supported by my new sponsor, over the course of a couple of hours,I made a mess on the living room floor... half watching some Moto2 from Aus... Too late for the Dremel... and Remember, Do not operate Power Tools when 'moderate'... stick to a wobbly-whirly... As for what went wrong? Zero!.. see what i did there! You'd have done it all if they hadn't red-flagged the race. 1 Quote Link to comment Share on other sites More sharing options...
PaulThePlug Posted October 25, 2023 Author Share Posted October 25, 2023 <back to the build / modder thread> Quote Link to comment Share on other sites More sharing options...
Andyjr1515 Posted October 25, 2023 Share Posted October 25, 2023 Excellent! Great exercise too - a proper workout 1 Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.57725e0d56fc5d86f53e9e8d401d64f2.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.