Minininjarob Posted November 10, 2023 Share Posted November 10, 2023 (edited) Iām looking to get my first head/cab setup and Iāve figured out some stuff but want to get some thoughts from the more experienced on here.Ā Modern small lightweight heads are expensive. I really want a GK head but they are Ā£Ā£Ā£Ā£Ā£.Ā Old school heads (not valve) are much cheaper and everyone keeps saying āx was amazing wish I still had it.ā Ā Even if they are a bit heavy they arenāt massive so I wonāt have an issue moving them around.Ā Now while I donāt have a back problem (worked in building trade for a long time) I would prefer a modern lightweight cab rather than some of the older boat anchors.Ā Ā So Iām thinking some sort of 400-500w solid state head on a 2x10 modern cab (or 2x 2x10). Seems to me an ideal balance between cost and performance.Ā Anyone do this, any pitfalls or issues?Ā One of the advantages of an older head is that I can probably fix it myself if something goes wrong as I do know electronics but the modern tiny electronics in my GK 112 combo are beyond me!! Edited November 10, 2023 by Minininjarob Quote Link to comment Share on other sites More sharing options...
Lozz196 Posted November 10, 2023 Share Posted November 10, 2023 Will work fine, quite possibly the best of both worlds, older heavier (both in weight & sound) amp, newer lightweight cab with the power handling capabilities of todays gear. I did it for a while with an Ashdown ABM amp and a Barefaced Big Twin. 1 Quote Link to comment Share on other sites More sharing options...
asingardenof Posted November 10, 2023 Share Posted November 10, 2023 39 minutes ago, Lozz196 said: Will work fine, quite possibly the best of both worlds, older heavier (both in weight & sound) amp, newer lightweight cab with the power handling capabilities of todays gear. I did it for a while with an Ashdown ABM amp and a Barefaced Big Twin. Ā I'm currently doing it with an ABM and a BF Two10S - can highly recommend this combination. 1 Quote Link to comment Share on other sites More sharing options...
Beedster Posted November 10, 2023 Share Posted November 10, 2023 Absolutely, IMO and AOTBE, older heads often sound better than modern heads, while newer cabs often outperform older cabs, so over and above logistics, it's likely an audio win alsoĀ š 3 Quote Link to comment Share on other sites More sharing options...
ossyrocks Posted November 10, 2023 Share Posted November 10, 2023 I have a 70's Fender Bassman 50 valve head which is currently being rebuilt and re-imagined by Martin Garton of Gartone Amps. I'm going to pair this with a Barefaced Super Compact. I actually think the cab might be lighter than the head! Ā Rob Quote Link to comment Share on other sites More sharing options...
Paul S Posted November 10, 2023 Share Posted November 10, 2023 My gig rig used to be an old Trace Elliot lump paired with a BF Supercompact.Ā Or two, if the occasion demanded or I just felt decadent.Ā 1 Quote Link to comment Share on other sites More sharing options...
ardi100 Posted November 10, 2023 Share Posted November 10, 2023 I'm currently considering the same, but with an older cab (for budget reasons) that I'll upgrade as and when. It seems to be a winner! Quote Link to comment Share on other sites More sharing options...
itu Posted November 10, 2023 Share Posted November 10, 2023 Love my Glockenklang Soul head from the Soul combo. It sounded excellent, but that weight, nearly 85 lbs. (38.5 kg). I didn't have any friends on gigs. Ā The Soul head itself is 24 lbs. (11 kg) and alusonic 2 x 12" is under 40 lbs. (18 kg). Easy to carry one after the other. I don't need a modern light weight head. (That Blue bird sure looks good...) Quote Link to comment Share on other sites More sharing options...
mr4stringz Posted November 10, 2023 Share Posted November 10, 2023 8 hours ago, asingardenof said: I'm currently doing it with an ABM and a BF Two10S - can highly recommend this combination. I was about to suggest this very combination.Ā 1 Quote Link to comment Share on other sites More sharing options...
PaulWarning Posted November 10, 2023 Share Posted November 10, 2023 That is my set up, Trace Elliott GP12 not too heavy 13kg and 2 Fender V2 cabs 1 x 10 and 2 x 8, both also 13kg each, can't see me changing any time soon Quote Link to comment Share on other sites More sharing options...
BassmanPaul Posted November 10, 2023 Share Posted November 10, 2023 6 hours ago, ossyrocks said: I have a 70's Fender Bassman 50 valve head which is currently being rebuilt and re-imagined by Martin Garton of Gartone Amps. I'm going to pair this with a Barefaced Super Compact. I actually think the cab might be lighter than the head! Ā Rob I can only hope that the Super Compact is very efficient. The Fender Bassman 50 was the most pathetic amplifier head I ever owned! Ā Quote Link to comment Share on other sites More sharing options...
ossyrocks Posted November 10, 2023 Share Posted November 10, 2023 12 minutes ago, BassmanPaul said: I can only hope that the Super Compact is very efficient. The Fender Bassman 50 was the most pathetic amplifier head I ever owned! Ā You've said that before when I've talked about this project. It's a ground up handwired build, including new transformers. Let's wait until it's finished to judge it. I'm optimistic, and so is Martin. Ā Rob Quote Link to comment Share on other sites More sharing options...
Downunderwonder Posted November 11, 2023 Share Posted November 11, 2023 Lots of very cheap Trace amps in the classifieds at the moment. Ā The trouble with some modern lightweight super high performance stuff is it actually needs a bit of wallop behind it to make it go. Try with you old iron before you buy. Quote Link to comment Share on other sites More sharing options...
Mudpup Posted November 11, 2023 Share Posted November 11, 2023 I've got the same setup - Mesa BB750 lead sled on top of a couple of Barefaced Big Baby cabs. Not an issue at all... Quote Link to comment Share on other sites More sharing options...
BassmanPaul Posted November 11, 2023 Share Posted November 11, 2023 19 hours ago, ossyrocks said: You've said that before when I've talked about this project. It's a ground up handwired build, including new transformers. Let's wait until it's finished to judge it. I'm optimistic, and so is Martin. Ā Rob With the new transformers is it still going to be 50W output? Ā Quote Link to comment Share on other sites More sharing options...
Downunderwonder Posted November 11, 2023 Share Posted November 11, 2023 One time my vintage Trace 15 was plugged in with a BigBaby. The BB was inaudible so I am picking it gives up a fair mess of sensitivity to vintage stuff in order to go crazy loud with lots of watts. Ā I imagine a super compact version of a BB isn't going to punch its way out of a wet paper bag without at least 200w up it. Ā Every 3dB of sensitivity deficit you start with requires that you double the power to make it up. That's well and good when 1000w amps are cheap as chips. Not so much with 50 going on 100w. Ā JBL E140 based cab is what you want. Mic that puppy into the PA and you will be envy of bassists around the world. Quote Link to comment Share on other sites More sharing options...
Lfalex v1.1 Posted November 12, 2023 Share Posted November 12, 2023 (edited) Works for me. Ā Markbass CS450 head intoĀ newerĀ Schroeder 21012L. Clean headroom for days. Sounds great.Ā Drive/ Vintageness ably supplied by a Two Notes "Le Bass" preamp pedal. Ā (So that's a 450w Class A/B head with a "lightweight" 2x10 with a 1x12 built in. Rated @ 1kW. 4 Ohm impedance. Pretty close to where you're headed?)Ā Ā Issues?Ā The Markbass doesn't like to have it's input stage clipped. Hence the dirt from the pedal. The Schroeder's tonal balance varies dramatically dependent on where you stand relative to it. In larger rooms at higher SPLs, this disappears. Both are peculiar to the devices concerned and aren't huge problems.Ā Ā I'd try any combination of amps/cabs that came my way.Ā Just out of interest as much as anything! Edited November 12, 2023 by Lfalex v1.1 Quote Link to comment Share on other sites More sharing options...
Japhet Posted November 12, 2023 Share Posted November 12, 2023 I'm currently using an Eden WT800 into a TechSoundsystems 2x12 and it sounds fabulous. I think the head probably weighs more than the cab but I guess it stops it from floating away. I'd say it's right up there with the best sounding setup I've ever had. Quote Link to comment Share on other sites More sharing options...
Al Krow Posted November 14, 2023 Share Posted November 14, 2023 Not all lightweight modern heads are expensive eg Bugera Veyron 1001M or 1001T, which both provide around 800W RMS. A fair few of us BC'ers have had one of these models and been very happy with them.Ā Quote Link to comment Share on other sites More sharing options...
Poacher Posted November 29, 2023 Share Posted November 29, 2023 I currently pair a Trace Elliot AH500-7 (500W head) with a Barefaced Super Twin cabinet (2 x 12", handles 1200W and very light to carry, but has 2 castors as well) Quote Link to comment Share on other sites More sharing options...
dannmarx Posted November 29, 2023 Share Posted November 29, 2023 If you're after a GK, I currently have an older one, a 1001RB (original mark I version) head for sale on eBay. It is pretty heavy but is relatively small with it being solid state, as you've mentioned. Rack mountable. Absolutely excellent condition for its age, and has original speakon cable and manual with it too.Ā Quote Link to comment Share on other sites More sharing options...
TheGreek Posted December 1, 2023 Share Posted December 1, 2023 I used Trace Elliot heads with Vanderkley cabs. Ā Recommend both. Quote Link to comment Share on other sites More sharing options...
Minininjarob Posted December 1, 2023 Author Share Posted December 1, 2023 On 29/11/2023 at 22:47, dannmarx said: If you're after a GK, I currently have an older one, a 1001RB (original mark I version) head for sale on eBay. It is pretty heavy but is relatively small with it being solid state, as you've mentioned. Rack mountable. Absolutely excellent condition for its age, and has original speakon cable and manual with it too.Ā Iād really love that head but itās too much money for me to be honest.Ā Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.