'66 Fender Precision for £899

[edstraker123]

https://www.ebay.co.uk/itm/134813295744?hash=item1f637fa480:g:Km0AAOSwV3plXJkY

 

Get your offers in !

[NikNik]

A Slab '66!!

[vinorange]

If you wait long enough it'll be free as it's been reduced from £899 to £499 then to £375.

[rwillett]

Most parts are original, the only parts changed are:

 

1. Body

2. Neck

3. Bridge

4. Tuners

5. Electrics

6. Pickups

7. Knobs

 

Strings are original and may need upgrading.

 

Rob

[Reggaebass]

22 minutes ago, rwillett said:

Most parts are original, the only parts changed are:

 

1. Body

2. Neck

3. Bridge

4. Tuners

5. Electrics

6. Pickups

7. Knobs

 

Strings are original and may need upgrading.

 

Rob

Screws 

neck plate 

bridge cover may also not be original 😁

[rwillett]

9 minutes ago, Reggaebass said:

Screws 

neck plate 

bridge cover may also not be original 😁

 

Damm, missed those.

[EssentialTension]

And what price would it command if it were an actual original '66 slab in actual original pink finish?

[rwillett]

10 minutes ago, EssentialTension said:

And what price would it command if it were an actual original '66 slab in actual original pink finish?

 

Dunno, I would assume a lot more than I could ever afford. Though I do quite fancy one in pink. I like the colour and if it was £150 I might well buy it.

[NikNik]

Gone!

 

I actually rather liked it. But not at the price asked.

[bigmuff69]

This was actually my bass that I built from a guitarbuild.co.uk body and a northwest guitars neck,I sold it about 3 years to an American student in Liverpool,I just bought it back for £150 last night and picked it up this morning,it’s a bit of a reclamation project,the neck is like a banana and the fretboard is detached ,but with a bit of TCL I’ll have up and running,and fir £150 I can’t grumble to much,I think I payed £50 for the wizard thumper pick ups

[rwillett]

So £899 down to £150? That's a good deal and I'd have paid that as well. 

 

Well done 

[Beedster]

Glad you got a bargain but that neck/board joint fail looks awful, I've not seen anything that bad before even on some quite badly neglected/mistreated instruments, doesn't say a lot for Northwest Guitars? 

[Beedster]

Hard to tell from the photo but also looks like they might be separating around 7th-9th fret?

[bigmuff69]

It looks like it had been left with full tension on strings in a shed for a few years,I’ll re glue the fret board tonight and see how it goes 

[rwillett]

Did this ever get fixed?