thebrig Posted February 1 Share Posted February 1 (edited) I’ve used Reaper on my 2015 MacBook Pro for a number of years without any problems until recently, and because other programs seemed to be running slower as well, I decided to do a factory reset. I’ve re-installed Reaper but it still seems to be struggling, has anyone got any ideas as to why, is it Reaper, or could it be my MacBook even though I’ve restored it to its original condition? Thanks in advance. Edited February 1 by thebrig To add photo my MacBook specs. Quote Link to comment Share on other sites More sharing options...
SubsonicSimpleton Posted February 1 Share Posted February 1 I'd get hold of a couple of diagnostic utilities (one to check cpu temperatures, one to check ssd status) and see whether there is an obvious hardware issue like overheating or imminent drive failure. Have you ever had the case open for a good clean? Quote Link to comment Share on other sites More sharing options...
pineweasel Posted February 1 Share Posted February 1 Assuming it's not something obvious like the disk being almost full, you can run the built in diagnostics https://support.apple.com/en-gb/102550 The internal clean suggestion is worthwhile. We had a couple of slow MacBook Pros in the office that turned out to have badly clogged fans. Quote Link to comment Share on other sites More sharing options...
thebrig Posted February 1 Author Share Posted February 1 Just a thought, could it be running slow because all my Reaper projects and files are saved to an external USB drive? Quote Link to comment Share on other sites More sharing options...
paul_5 Posted February 1 Share Posted February 1 Yes. Absolutely. Do you have a second internal SS drive to store them on? That would be the ideal solution. Quote Link to comment Share on other sites More sharing options...
thebrig Posted February 1 Author Share Posted February 1 9 minutes ago, paul_5 said: Yes. Absolutely. Do you have a second internal SS drive to store them on? That would be the ideal solution. No, but as I usually only work on one project at a time, would it be better if I was to create a folder on my desktop and work from that, and then when completed, move anything I want to save to an external drive? Quote Link to comment Share on other sites More sharing options...
thebrig Posted February 1 Author Share Posted February 1 (edited) I've transferred my current project to a folder on my desktop and it seems to be working fine now. Edited February 3 by thebrig 3 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.