___---___ Posted May 12, 2009 Share Posted May 12, 2009 Hey. Ok, so I have built myself a pedalboard out of, mainly, 18mm MDF. I'm super pleased with it. Eventually, I want to wire it up so that I have an instrument 'in' jack, an effects loop 'send' input, a jack 'out' and an effects loop 'return' output housed into the sides of the board. This would enable me to rock up anywhere with the board, plug a few cables in and play. My (first) question: where can I find jacks that would allow me to do this? Would I be able to find a 'two-sided' jack that I would plug into the side of the pedalboard, and plug into again on the inside? Or would it be hard wired? Another question: should I have a bank of, say, 3 sockets underneath the board (within its footprint) or should I do that outside the footprint of the board? I am just wondering about interference and the like. Lastly: any suggestions on wiring my board? I'm talking pedal to pedal really. I'm going to drill a matrix of holes and have everything concealed (think Radial Boneyard). Thanks in advance! X [catches breath] Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.