SamIAm Posted March 2 Posted March 2 The title says it all ... I'd love to hear about the various ways you use. Sam x Quote
itu Posted March 2 Posted March 2 - nothing (this is one very delicate solution) - double sided tape - velcro / 3M Dual Lock - cable ties - bike chain links (attached to the fx case) - fx case screws through the board from behind 1 Quote
tony_m Posted March 2 Posted March 2 Personally, I use a mixture of velcro and bike chain links, but found these an intriguing idea (albeit a likely-to-get-very-expensive-very-quickly idea!)... https://www.stomptrap.com/ 2 Quote
PaulThePlug Posted March 2 Posted March 2 Velcro... Oh... anyone know the size of a Dunlop Cry Baby Wah rubber foot screw? When ya take the rubber foot of for using velcro, the screw is too long. 1 Quote
tauzero Posted March 5 Posted March 5 I'm curious about 3M Dual Lock [TM] - is it reasonably easy to separate after sticking it together? 1 Quote
bouvier Posted March 5 Posted March 5 I have tried Aclam smart boards. Good idea but does use space on the board with clamps. Dual Lock tape works best for me. I read recently that Hot Glue Guns can be ideal, easy to apply easy to remove. I'm not convinced but hey ho it may be the way forward 1 Quote
PinkMohawk Posted March 6 Posted March 6 22 hours ago, tauzero said: I'm curious about 3M Dual Lock [TM] - is it reasonably easy to separate after sticking it together? I suppose it depends really. If you only use a little, which is all that's necessary, a good tug will separate it. If you use it like Velcro, you're going to need a pry bar. 3 Quote
Matt P Posted March 8 Posted March 8 (edited) On 02/03/2024 at 20:51, PaulThePlug said: Velcro... Oh... anyone know the size of a Dunlop Cry Baby Wah rubber foot screw? When ya take the rubber foot of for using velcro, the screw is too long. I'll have to double check when i get home but i think they are the same thread as computer case screws, I removed the feet from our guitarist's cry baby and i'm fairly sure that's what i used in their place as i have quite a stash of them. I don't have the pedal but i do have the original feet and screws safely stored away. Matt EDIT - for the OP I use the Velcro heavy duty (the proper branded stuff) I buy it in big packs from screwfix. Edited March 8 by Matt P 1 1 Quote
PaulThePlug Posted March 8 Posted March 8 14 minutes ago, Matt P said: i think they are the same thread as computer case screws, I removed the feet from our guitarist's cry baby and i'm fairly sure that's what i used in their place as i have quite a stash of them. Yep #6 32 UNC... 3.5" Hard Drive Screws are short and CSK. Base plates are thin but a little twist with a csk bit gets the screws flush enough to get em under the velcro height. 1 Quote
Matt P Posted March 8 Posted March 8 2 hours ago, PaulThePlug said: Yep #6 32 UNC... 3.5" Hard Drive Screws are short and CSK. Base plates are thin but a little twist with a csk bit gets the screws flush enough to get em under the velcro height. I used some of these I think, very thin flat head, no idea where they came from but they are definitely computer ones. 1 1 Quote
NJE Posted March 10 Posted March 10 3M dual lock is amazing stuff, I have all my pedals attached with it and it’s fantastic. I have only used small strips and that is a good balance of holding tight and being able to get it off without struggling. As mentioned above, if you use it like normal Velcro you will struggle to pull it off. 1 Quote
fretmeister Posted March 10 Posted March 10 Dual lock for me. Just don't use too much or you'll need a crowbar to get the pedal off again! 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.