Owen Posted March 26, 2024 Posted March 26, 2024 I am butchering/finessing and old Yamaha I have. I have noticed that the pickup surround rings are angled. And not in the same direction. What does that mean and should they be angled the same? TIA Quote
PaulThePlug Posted March 26, 2024 Posted March 26, 2024 (edited) Yes Mate... 'Gibson' Set-Neck Esq... usually stop n tail bridge normally have the angled rings of 2 sizes... Small size and edge to neck.. large size and edge to Bridge. As the neck is usually laid back 5 deg-ish... plus the archness of the body So the pickup poles distance from the underside of the string stays the same, even if the strings run further away from the body as the go to the bridge... 'Fender' Bolt-ons necks are usually more parallel-ish to the slabbier body, and less height difference pickup to pickup and string to body, while the pickup pole to string underside stays the same Strange i had angle surrounds on a Epi Bolt on LPish... swapped en for flat. The Yam Set or Thru-neck? Edited March 26, 2024 by PaulThePlug Quote
Owen Posted March 26, 2024 Author Posted March 26, 2024 Thanks. I was struggling to make sense of them. It is a bolt on. I am not together enough as a guitarist for it to make a blind bit of difference. But it was strange to look at. Quote
BigRedX Posted March 27, 2024 Posted March 27, 2024 IME angled pickup rings are for carved top guitars. Flat fronted guitars should use non-angled rings Quote
Owen Posted March 27, 2024 Author Posted March 27, 2024 The guitar has had so much abuse that it is entirely probable that these are not what Yamaha put on there. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.